0
The valve clearance specifications for the Fuso 4M51 engine are typically set at 0.20 mm (0.008 in) for the intake valves and 0.25 mm (0.010 in) for the exhaust valves when the engine is cold. It's important to check the specific service manual for your vehicle, as clearances may vary slightly based on model year or specific configurations. Regular maintenance of valve clearances is essential for optimal engine performance.
What else can I help you with?
What is valve clearance of Fuso 8DC9?
The valve clearance for the Fuso 8DC9 engine is typically set at 0.20 mm for the intake and 0.30 mm for the exhaust valves. It's important to check and adjust the valve clearances according to the manufacturer's specifications during maintenance to ensure optimal engine performance. Always refer to the specific service manual for precise instructions and any updates.
How do you align the timing marks on 4m51 Mitsubishi canter?
timing on 4m 51 engine
What is the valve clearance of Mitsubishi fuso 4d31?
The valve clearance for the Mitsubishi Fuso 4D31 engine is typically set at 0.15 mm (0.006 inches) for the intake valves and 0.25 mm (0.010 inches) for the exhaust valves when the engine is cold. Always refer to the specific service manual for your vehicle to confirm these specifications, as they can vary slightly based on the model year and application. Regular adjustments are essential for optimal engine performance and longevity.
What is the valve tappet clearance of Mitsubishi fuso 6d22 engine?
The valve tappet clearance for the Mitsubishi Fuso 6D22 engine is typically set to 0.15 mm (0.006 inches) for the intake valves and 0.20 mm (0.008 inches) for the exhaust valves when the engine is cold. It's essential to refer to the specific service manual for your vehicle for precise specifications and any model variations. Regular maintenance of the tappet clearance can help ensure optimal engine performance and longevity.
How do you reset check engine light on Mitsubishi fuso 2008?
how i reset check enging light manually at mitsubishi fuso 4m50
How do you adjust the engine valves on a 4 cylinder diesel Mitsubishi fuso FE-SP?
To adjust the engine valves on a 4-cylinder Mitsubishi Fuso FE-SP diesel engine, first, ensure the engine is cold and remove the valve cover. Use a feeler gauge to check the clearance between the rocker arm and valve stem for both intake and exhaust valves, which should be set according to the manufacturer's specifications. If adjustments are needed, loosen the lock nut on the rocker arm, adjust the screw to achieve the correct clearance, and then re-tighten the lock nut. Finally, recheck the clearance after adjustments before reassembling the valve cover.
How many liters of engine oil does fuso truck has?
Fuso makes different sized trucks with different sized engines. You'd need to specify a model in order for this question to be answered.
What is the oil capacity of a 2004 Mitsubishi fuso?
The oil capacity for a 2004 Mitsubishi Fuso varies depending on the specific engine model. Generally, it ranges from about 6 to 10 quarts (approximately 5.7 to 9.5 liters) for the engine oil. Always consult the owner's manual or a service guide for the exact specifications for your specific model and engine type.
Engine torque settings for 1989 Mitsubishi fuso main and conrod bearings valve clearance etc.?
For the 1989 Mitsubishi Fuso, the torque settings for main bearings are typically around 100-120 Nm (74-88 lb-ft), while conrod bearings are generally set to 40-60 Nm (30-44 lb-ft). Valve clearance adjustments usually require a gap of approximately 0.15 mm (0.006 in) for intake valves and 0.20 mm (0.008 in) for exhaust valves. Always refer to a specific service manual for your vehicle model to confirm these values, as they can vary slightly depending on the engine type.
How much does it cost to purchase a Mitsubishi Fuso?
The newest 2014 model of the Mitsubishi Fuso is approximately $65,000. A 2000 model Mitsubishi Fuso costs approximately $9,000 depending on the condition of the vehicle.
What is the firing order of Mitsubishi fuso?
The firing order for Mitsubishi Fuso engines can vary depending on the specific model and engine type. However, a common firing order for many of their inline 4-cylinder and 6-cylinder diesel engines is 1-3-4-2 for 4-cylinder engines and 1-5-3-6-2-4 for 6-cylinder engines. Always refer to the specific service manual for the exact engine configuration for your Mitsubishi Fuso vehicle.
Where is the thermostat located on Mitsubishi fuso fe145?
The thermostat on a Mitsubishi Fuso FE145 is typically located within the engine compartment, near the top of the engine, at the point where the upper radiator hose connects to the engine block. To access it, you may need to remove the hose and any surrounding components that could obstruct your view. Always refer to the vehicle's service manual for specific instructions and diagrams for accurate location and replacement procedures.
