50
To change the rear number plate light on a Citroen Nemo van, you will first need to locate the light housing on the rear of the vehicle. Then, carefully remove the screws or clips holding the housing in place. Once the housing is removed, you can access the light bulb and replace it with a new one. Finally, reassemble the housing and ensure it is securely in place before testing the new light.
License plate like bulb, on a Citrogen Picasso, can be changed by pushing the bulb in and turning at the same time. The bulb will come out. Insert the new bulb.
To change the number plate bulb on a Citroën C5 Estate, first, open the rear hatch and locate the number plate light assembly. Use a flathead screwdriver or a similar tool to gently pry the light cover off. Remove the old bulb by twisting it counterclockwise, then insert the new bulb and reassemble the cover. Finally, test the light to ensure it's working properly.
To change the rear number plate light bulb on a Citroën Saxo, first, locate the light assembly at the rear of the vehicle. Use a flat screwdriver to gently pry out the light cluster from its housing. Once removed, twist the bulb holder counterclockwise to release it, then replace the old bulb with a new one. Finally, reassemble the light cluster and ensure it is securely fitted back into place.
The number plate light is usually on the same circuit as the head lights.
I have a 2005 1.4 diesel. Fuse is GREEN 30a , located underneath glove box, pop open the black lid. (Book said it was a yellow 20a which also did interior light and number plate light)
Fuse under bonnet fuse number 13 15A fuse
The owners manual indicates fuse # 12 in the Fascia fuses is for the number plate and a number of other things including Hazard lights.
It's probably the same as in citroen c3. If you look at the lens you'll see a small hole at each side of the lens. Put a small screwdriver in it and then move the screwdrivers handle to the middle of the lens so the tip of the screwdriver pulls the hole to the outside. That should unclip it.
First remove the plastic cover of the rear door. You need a screw driver to pull the cover clips out of it's hole. You can see the back side of the plate light unit through an open path just beside the rear wiper motor. Push the clip gently and take out the whole unit and change the bulb.
You can set the timing on the Citroen boxer hdi 2 2 turbo 03 plate by using the clock dock.
I presume you mean number plate lights on the car boot.Take out the plastic lens cover over the bulb. You will need a small screw driver to push and it should pop out. Replace the bulb (Bulb: W 5 W ). Replace the lens which should click in place.Check this link for photo and instructions which will help: http://citroenc3owners.com/citroen-c3-tips/topic30.htmlRead more: http://wiki.answers.com/How_do_you_change_license_plate_bulb_on_a_citroen_c3#ixzz1bJhbE1Tx