Only in an emergency.
On a vehicle with anti lock brakes
The stab braking method is a technique used to stop a vehicle quickly during an emergency. It involves applying the brakes firmly and then releasing them once the wheels begin to lock up, allowing for a brief period of wheel rotation before reapplying the brakes. This cycle is repeated to maintain steering control while maximizing braking force, especially on slippery surfaces. The method helps prevent skidding and aids in maintaining control during sudden stops.
anti-skid braking system used on aircraft and on land vehicles, such as cars, motorcycles, trucks, and buses. ABS operates by preventing the wheels from locking up during braking, thereby maintaining tractive contact with the road surface.
Semi trucks often use compression brakes. When activated compression brakes open valves in the engine, slowing down the engine and bringing the truck to a stop. Non-semi trucks use disc brakes to stop. A common type of brake system used in big trucks is the air operated "S" cam.
All modern mass-produced cars and light trucks DO have hydraulic brakes on the front and the rear wheels. Heavy trucks generally have air brakes on all the wheels. Maybe you are thinking of cars that have disk brakes on the front and drum brakes on the rear? On cars, these are both hydraulically operated using the same hydraulic (brake) fluid. In normal stopping situations, the front brakes do more work than the rear brakes. Maybe 70 or 80% of the braking is done by the front wheels (it depends on where the weight is in the car and how fast you stop). Disk brakes are a somewhat better brake for a car, but drum brakes are a little cheaper to manufacture. So, disk brakes are almost always used on the front wheels where the braking is more important. Drum brakes are used on the back of some cars to save money. Note that performance cars (sports cars) almost always have disk brakes on all of the wheels.
Braking power transmitted to the front wheel is high compare to that of rear wheel normally(60:40 or 70:30) in motor cycle.Disc brakes which has high magnitude of braking power compare to that of drum brakes are used in motor cycles to absorb the more braking power.
air wedge- acutuated
Certainly, all four wheel brakes are used in normal stopping. However, the lions share of the stopping power is from the front brakes, yes.
mechanical and hydraulic are two different power transmission medium. in mechanical brakes solid links or levers are used to achieve the required braking. in hydraulic brakes there are no links, here the braking is achieved by the hydraulic fluid, the hydraulic system in which the force applied at the brake pedal is multiplied several times to achieve the requied braking.
Used in trucks and buses. This type of braking system of pneumatic and hydraulic hybrid vehicles.
The materials used in a car's braking system includes brake pads, brake caliper, and rotor. A cars brakes can be accessed by removing the tire from the car.
disc brakes are usually used on the front of a car is because the braking ratio for any Car is 70 / 30 ........70 percent of the braking power goes to the front 30 percent goes to the back also if you had disc brakes on the rear of the Car and you slam on (emergency stop) the brakes would lock and you would slide all over the road