To set the ignition points on a Case 300 tractor, first, ensure the engine is off and cool. Remove the distributor cap to access the points, then rotate the engine until the points are fully open. Use a feeler gauge to measure the gap, which should typically be set to 0.020 inches; adjust the points as necessary. Finally, reassemble the components and double-check the gap before starting the engine.
1-3-4-2
The John Deere company themselves offers these tractors. Their website allows a consumer to buy their vehicles, including the model 300 tractor. The price of the tractor itself is around $100,000.
300 pounds
five quarts
The average tractor trailer holds almost 300 gallons of gas! I am unsure of if you were speaking of a tractor trailer or a tractor for cutting the lawn.
100 to 300 is the norm.
4,413 lbs As posted on tractordata.com
Anywhere from 100 to 300, usually.
The setting on an iron that is approximately 300 degrees Fahrenheit is typically the "wool" setting. This setting is suitable for ironing wool or delicate fabrics that require low to medium heat.
If you are buying a brand new tractor door, you should expect to pay between 500 dollars and 700 dollars depending on the brand of the tractor. You can also find used doors for under 300 dollars.
Depends on how it's ordered. Could be anywhere from 100 to 300 gallons.
Referring to a US "Arctic" road tractor, generally between 20,000 - 25,000 lbs, though some - such as the ones with the 300+ inch wheelbase and ICT sleepers - will be heavier.