Behind the front bumper
Unbolt the front of the wheel well liner inside the wheel opening.Remove the bumper cover bolt from the bracket located inside of the bumper at the end.AT the front of the car, remove the bolts holding the bumper cover on, located underneath the vehicle.You should now be able to remove the bumper cover from the front of your Dodge Intrepid.An instructional video has been included to show you the removal process.
Yes it is the same.
Support the bumper with a jack or jackstandWith an assistant supporting the bumper remove the bolts/nuts retaining the bumper to the frameRemove the inner bumper bracket mounting bolts and the push-in fastners securing the air deflector to the bottom of the bumper fasciaDisconnect any wiring harnesses that would interfere with bumper removal and detach the bumper
remove plastic rivets and bolts holding bumper within fender well, between lights near hood latch, and bottom of bumber, be careful taking bumper off to prevent cracking. exact opposite for installing bumper
To remove the front bumper on a Peugeot 306, start by opening the hood and unscrewing the screws or bolts located at the top of the bumper. Then, remove any additional screws or clips located underneath the bumper and at the wheel arches. Carefully pull the bumper away from the car, ensuring to disconnect any wiring for fog lights or sensors if applicable. Finally, lift the bumper off the mounting brackets to complete the removal.
It should be behind the front bumper, in the front part of front left bumper.
how to remove front bumper on citroen berlingo
how to remove front bumper 2002 Impala
To remove the front bumper on a Hyundai Getz, start by disconnecting the negative battery terminal for safety. Then, remove any screws or clips securing the bumper, typically located under the wheel arches and along the top edge of the bumper. Carefully pull the bumper away from the body, making sure to detach any wiring harnesses for fog lights or sensors. Finally, gently lift the bumper off the mounting points to complete the removal.
To remove the front bumper on a 1984 Toyota Supra, first, ensure the vehicle is parked on a flat surface and the ignition is off. Begin by removing the screws or bolts securing the bumper to the fenders and the frame, typically found underneath the bumper and along the sides. Detach any electrical connectors for fog lights, if applicable, and carefully pull the bumper away from the vehicle. Finally, lift the bumper off the mounting brackets to complete the removal.
It should be behind the front bumper, in the front part of front left bumper.