A 6.70-15LT tire indicates a tire with a width of 6.70 inches, an aspect ratio that is typically not specified for LT (light truck) tires, and a rim diameter of 15 inches. The "LT" designation signifies that it is designed for light trucks, which can handle heavier loads compared to standard passenger tires. If you need to convert it to metric sizing, it would be approximately 170/80R15.
Not without a lot of re-building
3.50 degrees to inches
To convert a Presta valve to a Schrader valve on your bike tire, you can use an adapter that screws onto the Presta valve. This adapter allows you to inflate your tire using a standard Schrader pump. Simply screw the adapter onto the Presta valve and then use a Schrader pump to inflate the tire.
It is under the floor in the trunk unless the car has run flat tires. In that case you will not have a spare tire.
Bad Struts.
there should be a sticker on the door jam of your car (if not check the manual) of what the manufacturer recommended tire pressure.
To convert bike tire sizes, you need to know the current size and the desired size. Use a tire size conversion chart to find the equivalent size in the new measurement system. Make sure the new tire size is compatible with your bike frame and wheel size. Install the new tires and adjust the tire pressure as needed.
Yes, as long as you convert the size correctly. For instance if you have a 205/75-15 then you would need to install a 215/70-15 to keep the same ratios as the OEM tire. Click the link to figure the correct size you will need.
To convert a presta valve to a schrader valve, you can use an adapter that screws onto the presta valve. This adapter allows you to inflate your tire using a schrader pump.
A 265/70R17 tire has an overall diameter of approximately 31.6 inches. This measurement is derived from the tire's width (265 mm), aspect ratio (70%), and wheel diameter (17 inches). To convert the dimensions, you can use the formula: Diameter = (Tire Width * Aspect Ratio * 2 / 25.4) + Wheel Diameter.
To convert your bike tires to UST tubeless for a smoother and more reliable riding experience, follow these steps: 1. Remove the existing tire and tube from the wheel. 2. Install a UST tubeless rim tape on the wheel rim. 3. Insert a UST tubeless valve into the rim. 4. Mount the UST tubeless tire onto the rim. 5. Add sealant to the tire to prevent punctures. 6. Inflate the tire to seat the bead properly. 7. Check for leaks and adjust tire pressure as needed.
To convert 50 mph to RPM, you need to know the circumference of the tire. For example, if a tire has a diameter of 24 inches, its circumference is about 75.4 inches. First, convert 50 mph to inches per minute (50 mph = 3,960 inches per minute). Then, divide the speed by the circumference (3,960 inches per minute ÷ 75.4 inches ≈ 52.5 RPM). Thus, 50 mph is approximately 52.5 RPM for a tire with a 24-inch diameter.