answersLogoWhite

0

I show 387 SBA 340500920 From my last invoice.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is the cross reference for a new holland hydraulic oil filter fits 2007 new holland TC48DA diesel tractor The only number you see on the filter is 9V07 which came on the tractor when you purchase?

SBA340500960 is the part number for the Case/New Holland hydraulic filter. 86018758 and 86989735 appear to be compatible, as well.


What is the Case 1070 tractor oil filter number?

A75294


Where is hydraulic filter on case 695?

if you are setting on the tractor under your left hand side behind the footstep, Looks like a drum with a bolt thru the center


Where do you fill hydraulic fluid on a case 1290 tractor?

On a Case 1290 tractor, the hydraulic fluid is typically filled through the hydraulic reservoir, which is located near the rear of the tractor. To access the hydraulic reservoir, you may need to remove a cap or cover on the top of the reservoir. It is important to use the correct type of hydraulic fluid recommended by the manufacturer and to fill the reservoir to the appropriate level to ensure proper functioning of the hydraulic system.


Where is the hydraulic fluid fill for a Case 870 tractor?

Looking at the back of the tractor. On the left hand side above the PTO


What is the hydraulic fluid capacity of Case IH MX 170 tractor?

The hydraulic fluid capacity of Case IH MX 170 tractor is 25.5 gallons. It's important to use enough fluid or the transmission could be damaged.


What type hydraulic fluid does a Case 430 tractor use?

how transmission oil capacity


Where is the Hydraulic fluid cap on a case 730 tractor?

The hydraulic reservoir on the case 730 should be in about the same area as the case 630......on the right side of the tractor at the rear of the engine and on what would be the bell housing is a large cap screw type plug. There should be a dipstick not too far from it....you add hydraulic oil there, if it is a case-o-matic. If it is a standard transmission, then the dipstick and the plug should be on the rear of the tractor around where the seat bolts on.


How do you check hydraulic fluid on case jx 80 tractor?

To check the hydraulic fluid on a Case JX 80 tractor, first ensure the tractor is on a level surface and the engine is turned off. Locate the hydraulic fluid reservoir, typically found near the rear of the tractor. Remove the dipstick or cap, wipe it clean, reinsert it, and then pull it out again to check the fluid level against the markings. If the level is low, add the appropriate hydraulic fluid as specified in the owner's manual.


What is the capacity of hydraulic fluid for a Case 870 tractor?

64 Quarts with both filters changed.


What type of hydraulic fluid to use in a 3045 century tractor?

any hydraulic transmission oil such as Hy-tran Case IH or Hy-Gard John Deere


Where is the hydraulic fluid cap on a case 1190 tractor?

Well, friend, finding the hydraulic fluid cap on your Case 1190 tractor is like finding a happy little tree in a meadow. It's usually located near the back of the tractor, close to the hydraulic pump. Take a gentle stroll around the tractor and you'll spot it in no time. Just remember, there are no mistakes, only happy accidents in finding that cap.