0
The cost to replace a transfer case module typically ranges from $1,000 to $2,500, depending on the make and model of the vehicle, labor rates, and whether the part is new or remanufactured. Labor costs can vary significantly, often adding $100 to $200 to the total. It's advisable to obtain quotes from multiple repair shops to get a more accurate estimate for your specific situation. Additionally, factors like warranty and location can influence the overall cost.
What else can I help you with?
Cost to replace Chevy Avalanche transfer case motor encoder cost?
Just took it in to dealer for a 2003 Avalance 4WD. 3.5 hrs of work plus encoder module. $450.00
Cost to replace a Jeep Wrangler transfer case?
about $1000
How much will it cost to replace a transmission for a 2002 gm Yukon XL?
friend,I have a 2001 Denali XL,i had to have the transmission and transfer case done,the transfer case from gmc is about $1800.00 no labor,transmission with labor was about $2600.00 my total job was about $4800.00
How do you reset ABS light on 1999 Volvo V70?
Replace the ABS module - from what I read it will cost about 900 bucks
How do you replace vacuum switch on transfer case for four wheel drive on 1999 Dodge 1500 4x4?
The vacume switch is located on top of the transfer case left side. Just pull the rubber plug on top and unscrew with a crescent or wrench and replace. Buy a pressure kit first and check to make sure the vacume is going into the switch and not comming out. Kit cost about 25 dollars. buy
In a 1993 Jeep Grand Cherokee LTD when you go to turn a corner the back tires skip and the front will not disengage what do you do?
It's your viscous coupler. That part is located in the rear housing of your transfer case. Likely there is nothing wrong with the transfer case itself, these couplers are a wear item and do not last forever. Mine went at 203,000 miles. You can replace the coupler and avoid the cost of a new transfer case. It's possible to replace it with the transfer case still in the jeep, that's how I did mine. Or you can pull the whole unit if that's something you're comfortable with.The replacement procedure isn't difficult but reaching the snap ring can be a bit tricky with the case in the truck.
What is the cost to replace an ignition module in a 93 Chevy Lumina?
All together depending on where you go parts and labor about 722.00 : - )
How does it cost to replace a transfer case in a jeep liberty?
it cost around 700 to have one rebuilt that included about 300 in labor. found some on-line between 450.00-900.00 that was rebuilt or used with between 40000-100000 miles on them installed myself so dont know labor cost for installation
What does it cost to replace abs module for a 2002 Chevy suburban at the Chevy dealer?
The part is approximately $920 from the dealer - that is just the ABS module and not the pump too. Installation will vary depending on your shop rates.
Why 4x4 truck cost more?
Because of the required extra equipment a 4x4 needs, for instance a transfer case.
How much does transfer case cost?
The cost of a transfer case can vary widely depending on the make and model of the vehicle, as well as whether you choose a new, used, or rebuilt unit. On average, a new transfer case can range from $1,000 to $3,000, with additional labor costs for installation typically adding another $500 to $1,500. It's advisable to check with local mechanics or dealerships for specific pricing related to your vehicle.
Where can I buy a 1992 Mercedes Benz 300E 4matic transfer case The cost in Canada is a whopping 2670.00?
car-parts.com
