I would adjust the timing for best performance without more than a bit of knock under maximum load. I recall that with propand you can run LOTS more compression.
180
The difference between tuning to A432 and A440 is the frequency at which the A note is set. A432 is slightly lower in pitch than A440. Tuning to A432 can create a warmer and more relaxed sound in music, while A440 tuning is more commonly used and can sound brighter and more energetic.
In music, the difference between well-tempered and equal-tempered tuning systems lies in how they distribute the tuning of notes across the musical scale. Well-tempered tuning adjusts the tuning of each note slightly to create harmonious intervals in specific keys, while equal-tempered tuning divides the octave into equal intervals, allowing for flexibility in playing in different keys without retuning.
The main difference between drop C tuning and standard C tuning for guitar is that in drop C tuning, the lowest string is tuned down two semitones to a C note, while the rest of the strings remain in standard tuning. This allows for heavier and deeper sounds compared to standard C tuning, where all strings are tuned to standard notes.
The standard notes used in guitar regular tuning are E, A, D, G, B, and E.
The main difference between C standard tuning and drop C tuning in guitar playing is that in C standard tuning, all strings are tuned to standard pitch (EADGBE), while in drop C tuning, the lowest string is tuned down two semitones to a C note. This results in a lower overall pitch and allows for heavier, more aggressive playing styles.
Im presuming you are talking about the Gibson robot guitars. Well they can tune themselves! No need to touch the tuning pegs, just fiddle with the knobs and the mechanised tuners will do all the work.
A half link is a chain link that is half the length of a regular link, used for fine-tuning chain length. A master link is a special link that allows for easy removal and installation of the chain.
The main difference between playing in drop D tuning and standard D tuning on the guitar is that in drop D tuning, the lowest string is tuned down a whole step to D, while the rest of the strings remain in standard tuning. This allows for easier power chords and heavier riffs. In standard D tuning, all strings are tuned one whole step down to D, resulting in a lower overall pitch for all notes played.
It is recommended to schedule regular tuning for your guitar every 1-3 months to maintain its optimal sound quality.
The difference between tuning string instruments and wind instruments is that with string instruments, you must adjust the tension of the strings in order to tune/change the pitch. With wind instruments (most of the time), you have to pull a part of the instrument either in or out to change the pitch/tune (pulling it out would make the pitch lower, and pushing it in would make the pitch higher). For example, with a trombone, there is a tuning slide at the top that you can pull or push out. If you had a saxophone, you would have to pull out or push in on the mouthpiece. If you had a guitar (string instrument), however, there are tuning keys that you can turn to adjust the tension of the strings.
There's no physical difference between a Porsche Turbo and a Porsche Turbo S beside the ECU tuning. Many of the options you would pay for on the non "S" version are standard on the Turbo "S"