answersLogoWhite

0

Varies by state/national law. Typical allowance for a tandem truck would be 54,000 lbs gross weight, regardless of manufacturer.

When you get into a state such as North Carolina, which has some very idiosyncratic bridge law weight, and which may vary by the vehicle's wheelbase (and, I might add, only applies to intrastate vehicles, while interstate vehicles aren't affected by this), it gets a lot more complicated.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How much does the 1988 Kenworth dump truck weigh?

The weight of a 1988 Kenworth dump truck can vary depending on its configuration and specifications, such as engine type and bed size. Generally, a typical Kenworth dump truck from that era can weigh between 20,000 to 40,000 pounds when empty. For precise weight, it’s best to refer to the specific model and any additional equipment it may have.


What is the Gross Weight of a Ford F9000 dump truck?

empty weight


Where can one buy a Kenworth dump truck?

A Kenworth dump truck can be bought from Truck Paper, Commercial Truck Trader, Fast Line, Auto Trader, eBay, 50,000 Trucks, Trucker To Trucker and Asset Nation.


WHAT IS GROSS WEIGHT ON 10 YARD DUMP TRUCK?

The gross weight of a 10-yard dump truck typically ranges from about 26,000 to 35,000 pounds, depending on the truck's size and configuration. This weight includes the truck itself, the cargo, and any additional equipment. The specific gross weight can vary by manufacturer and model, as well as local regulations regarding weight limits. Always consult the manufacturer's specifications for precise figures.


What is the unloaded weight of a 1999 tri axle kenworth t800 dump truck?

In the vicinity of 24,000 - 26,000 lbs, all things dependent.


What is the weight of 2006 Kenworth truck?

Kenworth... what? Kenworth manufactures a range of trucks from Class 5 through Class 8... as is, we don't know if you're talking about a T300 box truck, a T800W heavy haul tractor, a W900L line haul tractor, a T800 dump truck, etc. Need to be more specific.


What is the gross weight of an empty 5 yard dump truck?

It's a trick question. The gross weight would be the loaded weight (combined weight of both the truck itself AND its load). The empty weight would be the net or TARE weight.


Is a dump truck fast?

Some are. I know one of our contractors who has a Kenworth T-800 dump truck with a 525 Cummins, and that truck will move, I tell you. But a normal fleet truck isn't going to be particularly fast.


What is the gross weight of a 1980 Mack dump truck?

The gross weight of a 1980 Mack dump truck typically ranges between 26,000 to 33,000 pounds, depending on the specific model and configuration. Factors such as the type of chassis, engine, and any additional equipment can influence the overall weight. It's important to refer to the manufacturer's specifications for precise figures.


What does the GVW on a truck mean If you had a triaxle dump truck with a GVW of 60000 does that mean your truck can weight up to that much what if you decided to pull a trailer that weighed 20000?

GVW is gross vehicle weight which is different than GCWR (gross combination weight rating). Pulling a trailer weighing 10 tons should not cause you any problems. However I am assuming you have your dump tagged at a little less than 55,000 to avoid paying heavy use tax. Even if this is not the case and you have tagged it for a heaver weight be aware that pulling that trailer while dump and trailer are loaded may put yousignificantly over your tagged weight. Just watch your gross weight or you can re-tag your dump for 80,000. When GCWR is not available on the power unit DOT will add the GVW for the dump and the trailer to get a GCW (gross combination weight).


Tell me gross veh weight of 1993 F350 dump truck?

I have a diesel 4x4 that has dual wheels. It weighs 8300 lbs.


What average weight of a dump truck?

Which weight? Gross weight? Tare weight? What configuration? 1 ton pickup? Single axle Class 7/8 truck? Tandem axle truck? Tri-axle truck? Quad axle truck? Quint axle truck? Centipede? "Superdump" quint with Strong Arm? Transfer truck? Tractor-trailer end dump, or belly dump, or side dump? Try to narrow down the variables a bit. There's really no way of knowing what an "average" dump truck is without knowing statistics of how many single axle, tandem, tri-axle, quad, quint, centipede, and superdump dump trucks are out there - to the best of my knowledge, no such statistics have been compiled. At the company I work for, our tandem axle dumps (with steel dump bodies) weigh between 23,000 and 24,500... the 23,000 lbs. trucks are the Peterbilt 330s, and the 24,500 lb. trucks are the Kenworth T800s with "rock tub" steel bodies, high lift gates, and split gate beds. These are the tare (empty) weights, not the loaded weights.