One of the highest has to be the equivalent COP of a Fujitsu RLQ series ductless mini-splits, which run as high as 6.15 COP (21 SEER).
The HVAC Veteran
The formula for the coefficient of performance (COP) of a heat pump is the ratio of the heat output to the work input. It is calculated as COP Qh / W, where Qh is the heat output in watts and W is the work input in watts. A higher COP value indicates a more efficient heat pump.
The heat pump equation used to calculate the efficiency of a heat pump system is the Coefficient of Performance (COP) formula, which is the ratio of the heat output to the work input. It is expressed as COP Qh / W, where Qh is the heat output in watts and W is the work input in watts. A higher COP value indicates a more efficient heat pump system.
Coefficiency of performance.
The formula for the coefficient of performance (COP) of a heat pump operating in the heating mode is the ratio of the heat output to the work input. It is calculated as COP Qh / W, where Qh is the heat output in watts and W is the work input in watts.
Since the Coefficient of Performance (COP) is 2.5, for every 1 watt of electricity input, the heat pump produces 2.5 watts of heating or cooling output. Therefore, if 200 watts of electricity are used, the heat pump would produce 2.5 times 200, which equals 500 watts of equivalent heat output.
Im really not sure of the question but if you are refering to using an electric immersion heater in a thermal store over a ground source heat pump, the immersion heater has a COP of 1 and the ground source heat pump has a COP of 3. So 3 times better.
in refrigeration CoP =Qo/w= Todelta S/(Tk-To)delta S= To/Tk-ToEc = 1/(Tk/To)-1in heat pump CoP = Qk/W= Tkdelta S/(Tk-To) delta S= Tk/Tk-ToEh = 1/1-(To/Tk)
To increase the coefficient of performance (COP) of a Carnot refrigerator or heat pump, you can enhance the efficiency of the system by reducing the temperature difference between the heat source and sink, improving the insulation of the system to minimize heat losses, and utilizing more efficient components such as compressors or heat exchangers. Additionally, optimizing the working fluid and operating conditions can also help improve the overall performance of the system.
Bon cop, bad cop
In the Heat of the Night - 1988 Good Cop Bad Cop 7-13 was released on: USA: 6 January 1994
1
100 marks in each test.