answersLogoWhite

0

What else can I help you with?

Related Questions

What two examples of where the work at height regulations may apply to 360 excavator operattions?

The Work at Height Regulations may apply to 360 excavator operations in situations such as when the excavator is used for tasks that involve reaching elevated areas, such as loading materials onto a higher platform or working on a slope. Additionally, these regulations would be relevant if the operator or crew is required to access the excavator’s cab or any elevated attachments for maintenance or safety checks, necessitating proper fall protection measures.


What is the average pay of 360 excavator operator in Ireland?

€15.04 p/hour for first 39 hrs, then overtime after this (15.04 x 1.5)


In what situation does a hard hat not need to be worn when operating a 360 excavator?

When you aren't operating/when there is no overhead objects/or uneven travel ground incase of a overturn.


How many dollars is 360 euros?

360 euros into dollars is $440.26. This is because the ratio of euros to dollars currently is 1:1.22. So 360 multiply by 1.22 = to $440.26. This does vary hourly as the conversion will vary.


What is the maximum power consumption in watts for a device that operates at 30 amps?

The maximum power consumption for a device operating at 30 amps is 360 watts.


Where is the fuel filter located on a 1990 Dodge Ram 2500 360 with fuel injection and not carburetor?

fuel tank


How does an excavator pivot head works?

An excavator pivot head, also known as a swing mechanism, allows the upper structure of the excavator to rotate independently of the undercarriage. This is achieved through a series of hydraulic cylinders and gears that enable smooth and controlled rotation, typically up to 360 degrees. The pivot head is crucial for maneuverability, allowing the operator to efficiently position the boom and bucket for digging, lifting, or dumping without needing to reposition the entire machine. This design enhances the excavator's versatility in various construction and excavation tasks.


Where to find the answer to cpcs 360 excavator renewal test?

To find the answer to the CPCS 360 excavator renewal test, you can visit the official CPCS (Construction Plant Competence Scheme) website or contact an accredited training provider. They often provide resources, practice materials, and guidance for renewal tests. Additionally, consider joining online forums or social media groups focused on plant operation where members may share study tips and resources.


Where is the fuel pump on a 1988 jeep wagoneer?

If it has a 360 motor the mechanical fuel pump is located below the distributor. there could be an after market electrical fuel pump located near the tank. these answers are based upon my 89 grand wagoneer with a 360. The fuel pump on an 88 Wagoneer is in the fuel tank itself.


Where is the fuel filter on a 1997 dodge ram 2500 360 mag?

I assume it is in the tank. I know it was on my 96 ram 360.


How many gallons of fuel were remaining when the Spirit of St. Louis landed in France?

360-gallon. fuel tank


What should the fuel pressure be for a 1998 dodge 2500 pickup with a 360 fuel injected motor?

50 psi +or-5