The 16x80 measurement is the travel measurement it includes the hitch which is 4ft so really it's a 16x76 & then you would also have to exclude the exterior walls including siding, framing, and inner walls. I think when I measured my inside width it was about 14.75. so you would also need to deduct that 1.25 ft from the ends as well so then you would be @ 14.75 x 74.25 & then you could do the math so just under 1100 sq ft but still not bad.
how much viynal sising for 16x80 mobile home
Multiply the two dimensions to get the area. The calculation will give you 1.280 square feet.
Multiply the two dimensions to get the area. The calculation will give you 1,280 square feet.
Most single wide mobile homes are 14 feet by 70 feet, giving them an approximate square footage of 980 sq ft. A typical double wide home is 28 feet by 70 feet for an approximate square footage of 1960. The square footage on a mobil home can vary greatly depending on the size of the home. The average mobil home has about 1000 square feet.
That would be 960 sq. ft.
1,400 -1,500 sq. feet.
To calculate the square footage of a mobile home, you would multiply the length by the width. In this case, a 14x70 mobile home would have a square footage of 980 square feet (14 x 70 = 980). Keep in mind that this calculation assumes the dimensions are in feet and that the shape is rectangular with no additional areas like porches or attachments.
To determine the square footage of your home, measure the length and width of each room and multiply these dimensions together. Add up the square footage of all rooms to get the total square footage of your home.
To determine the square footage of your home, measure the length and width of each room in feet, then multiply the length by the width to get the square footage of each room. Add up the square footage of all the rooms to get the total square footage of your home.
To find the square footage of a home, measure the length and width of each room in feet, then multiply the length by the width to get the square footage of each room. Add up the square footage of all the rooms to get the total square footage of the home.
To find the total square footage of a 28x76 mobile home, you would multiply the length (28 feet) by the width (76 feet). This calculation would give you a total of 2,128 square feet for the mobile home.
To find the square footage of your home, measure the length and width of each room and multiply these dimensions together. Add up the square footage of all the rooms to get the total square footage of your home.