most all bumper pull travel trailers should be under 4 thousand pounds
The weight of an empty 28-foot pup semi-trailer typically ranges from 10,000 to 14,000 pounds, depending on the trailer's construction, materials, and design. Factors such as whether it is a standard or specialized trailer can also affect its weight. It's important to check with the manufacturer or specific model specifications for the most accurate weight.
We have a 25' and it weighs 4800 lbs.most RV centers will give you that info, i found it online at a web site that gives estimates for trailers.
The weight of a 1982 Mallard 28-foot trailer typically ranges between 4,000 to 6,000 pounds, depending on the specific model and its features. It's essential to check the manufacturer's specifications or any documentation for the exact weight, as variations can occur based on added options or modifications. Always ensure that your towing vehicle can handle the trailer's weight for safety.
To determine if a 28-foot boat can fit on a 7,000-pound trailer, you need to consider both the boat's weight and its dimensions. Generally, a 28-foot boat could weigh anywhere from 3,000 to 7,000 pounds or more, depending on its construction and design. Additionally, the trailer must be long enough to accommodate the boat's length. If the trailer's weight capacity and length are sufficient, then it can fit; otherwise, it may not be suitable.
The load capacity of a 28-foot semi trailer typically ranges from 10,000 to 26,000 pounds, depending on the trailer's design and the weight limits set by regulations. However, the maximum payload also depends on the type of cargo, weight distribution, and local laws regarding road weight limits. Always consult the manufacturer's specifications and local regulations to ensure compliance.
If I remember right they average around 8000 lbs with a single axle.
Going Nomad - 1998 was released on: USA: 28 July 1998 (Dances With Films Festival of the Unknowns)
The 1978 Glendette 290 Standard Travel Trailer or the Glendette Deluxe 290 Travel Trailer by Glendale Corp. Strathroy, Ontario. The dry weight is estimated at 4718 lbs and the dry hitch weight is estimated at 562 lbs. This info comes out of 1987 Glendette brochure for model 295. From 1977 to 1992 the construction of the Glendette travel trailer was pretty much standard. Taking the specs out of a 1987 brochure would be really no different then a 1978 model which would have been the 290 model. This would be the closest model number for a 28' trailer in that year. If it is a Glendette Deluxe with molded ABS front and back add about 400lbs to the dry weight because of the moulded front and back as well as the heavier cabinetry inside the trailer. For gross weight the Glendette of this size would have had axles rated for 6500 to 7000lbs combined. This would allow for a cargo carrying estimate of approximately 1700 to 2200 pounds maximum. There should be a sticker on the road side of the unit indicating this in kg. Also in one of the cabinets inside there should be a manufacturer's unit fact sheet with this same info. The best advice is to take your Glendette to a truck weigh scale and weigh it empty to see how accurate the mfg information was in the brochure. The difference if any will also affect the hitch weight of your unit. A hitch weight is 10 to 15% of the units actual weight .
28
NOMAD A Story of Damon Robinson - 2013 was released on: USA: 28 April 2013 (Newport Beach International Film Festival)
Your tractor drive tandems could weigh in at 34,000 lbs, but you could only have 20,000 lbs. on the single axle of the trailer.
The number of pallets that can fit in a 28-foot trailer depends on the size of the pallets and the layout used for loading. A standard pallet is typically 48 inches by 40 inches. In a 28-foot trailer, which is about 336 inches long, you can generally fit around 12-14 standard pallets, depending on how they are stacked and arranged. It's important to also consider weight limits and any space needed for securing the load.