0
What else can I help you with?
What is a steering wheel?
A steering wheel is the wheel that is in front of the driver of a car. It is held in the hands and is used to turn the wheels to control the direction of the car is going.
What is front wheels on forklift used for?
The front wheels on a forklift are primarily used for steering and maneuverability. They allow the operator to control the direction of the forklift, enabling it to navigate tight spaces and make sharp turns. Additionally, the front wheels support the weight of the load being carried and play a crucial role in the overall stability of the forklift during operation. Proper maintenance of the front wheels is essential for safe and efficient performance.
What is the name of wheels used to change the direction or speed of a machine?
Gears are used to change the direction or speed of a machine. They consist of toothed wheels that mesh together to transmit power and motion.
What is a front or rear dig in volved in 4x4 off road driving?
A front or rear dig in 4x4 off-road driving refers to a technique used to help a vehicle navigate difficult terrain by selectively engaging the front or rear wheels. In a front dig, the front wheels are engaged while the rear wheels are disengaged, allowing the vehicle to pivot around the front axle, which can help in tight spots or steep inclines. Conversely, a rear dig engages the rear wheels and allows the front wheels to spin freely, which can aid in maneuvering out of tricky situations. Both techniques enhance control and maneuverability in challenging off-road conditions.
Why tractors used in farms has large rear and small front wheels?
Some farm tractors that have small wheels in the front and larger wheels in the back is to help farmers pull larger equipment. The large tires have more traction and the smaller wheels help to steer.
Where are the speedometer sensors on a 2002 dodge grand caravan?
they used to be on the front wheels?
Where is a control arm used?
A control arm is used in automotive suspension. The control arm is also known as the wishbone, A-arm or A-Frame. The control arm is used to attach the wheels of a car to the rest of the frame.
Where are the steering linkages?
Steering linkage is a term used to describe all the components used in the front of your vehicle to turn the wheels. It will all be located in the front of your car.
Is there a drive shaft in a 98 Pontiac Sunfire?
No there are Cv joints which connect directly from the tranny to the front wheels and act as drive shafts. Most rear wheel drives will have drive shafts as to connect from front to back. The reason CV's must be used in front wheel drive is because of the wheels being used for turning. If it was a drive shaft to the wheels, they would not be able to move.
What machine component is defined as used on wheels that are only allowed to rotate in one direction?
A ratchet is a machine component used on wheels that allows them to rotate in only one direction. It typically consists of a gear with teeth that prevent movement in one direction and allow movement in the opposite direction. Ratchets are commonly found in tools like socket wrenches and come in various designs to suit different applications.
What controls a rocket ship in space?
A rocket ship in space is controlled by a combination of thrusters, reaction wheels, and control moment gyros. Thrusters are used for changes in velocity and trajectory, while reaction wheels and control moment gyros help orient the spacecraft and maintain stability. Guidance systems and computers on board help control and coordinate these systems for navigation in space.
Why aren't hydraulic brakes used for rear wheels when the same is used for the front wheels?
All modern mass-produced cars and light trucks DO have hydraulic brakes on the front and the rear wheels. Heavy trucks generally have air brakes on all the wheels. Maybe you are thinking of cars that have disk brakes on the front and drum brakes on the rear? On cars, these are both hydraulically operated using the same hydraulic (brake) fluid. In normal stopping situations, the front brakes do more work than the rear brakes. Maybe 70 or 80% of the braking is done by the front wheels (it depends on where the weight is in the car and how fast you stop). Disk brakes are a somewhat better brake for a car, but drum brakes are a little cheaper to manufacture. So, disk brakes are almost always used on the front wheels where the braking is more important. Drum brakes are used on the back of some cars to save money. Note that performance cars (sports cars) almost always have disk brakes on all of the wheels.
