answersLogoWhite

0

Depends on the trailer weight rating. If it's a type with a ball hitch and intended to be towed by a light vehicle, you'd be best advised to use at least a 3/4 ton pickup. If it's something like a 20 ton tagalong trailer with air brakes, then you'd need a Class 7 or Class 8 vehicle to tow it.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is the bridge length of a 53 foot trailer?

The bridge length of a 53-foot trailer typically refers to the distance between the center of the front axle and the center of the rear axle. For a standard 53-foot trailer, this dimension can vary based on the configuration of the truck and trailer combination, but it is generally around 40 to 45 feet. This measurement is important for compliance with various state and federal regulations regarding vehicle lengths and weights.


How much can a split axle tractor trailer hold on the back axle?

A ten foot spread axle trailer is allowed 20,000 lbs. per axle, for a total of 40,000 lbs.


What is the maximum load capacity of a53 foot tri axle semi trailer?

The maximum load capacity of a 53-foot tri-axle semi-trailer typically ranges from 40,000 to 50,000 pounds, depending on the trailer's design and construction. It's important to consider the trailer's Gross Vehicle Weight Rating (GVWR) and the weight limits set by federal and state regulations. Always check specific manufacturer specifications and local regulations to determine the exact capacity for a particular trailer.


How long of an axle do you need when making a 5 foot utility trailer?

Five foot wide? A six foot six axle measured hub face to hub face is about right. BUT What you need are 4 foot 10 inch ish spring pads. I allways call my axle supplier and ask them what they can build me. A new axle for my 4 foot wide quad/Golf cart/toy trailer cost about $180. Standens axle Calagary Alberta big thumbs up!


What is weight of 18 foot boat trailer?

An 18' Aluminum Single Axle Trailer is 575 lb.Bruce at All American Trailers


What is the weight limit for split axle trailer in Missouri?

With a ten foot spread, you can have up to 40,000 lbs. total on the trailer axles, but no more than 20,000 lbs on each individual axle.


What is axle by axle weight limit on 53 foot drivevan?

The axle weight limit for a 53-foot dry van trailer typically adheres to federal regulations in the United States, which allow a maximum of 34,000 pounds on the tandem axles (the two axles at the rear of the trailer). The Gross Vehicle Weight Rating (GVWR) for the entire combination, including truck and trailer, cannot exceed 80,000 pounds on interstate highways. However, it's essential to check local regulations, as they may vary by state. Always ensure proper distribution of cargo to meet these limits.


What is the capacity of an enclosed trailer?

It depends on the use of the trailer as to what it will be used for. This is the baasic factor which will help in deciding the size and use of the commodity. A handyman who looks for a trailer may choose a 5 foot wide axle in order to fit his tools. A race car driver may need a 8 foot tandem axle trailerwith ramp and tread plates for his race car. So it is important to know what will be the enclosed trailer used for. The trailer weight can be about 250 lbs.


What are maximum weight limits per axle on a 3 axle semi truck and a 38 foot tripple axle lowboy trailer?

Your question is a bit more ambiguous than you realize. Without taking into account what state(s) this vehicle is/are operating in, whether any permits are in effect, etc., the simple answer is that the combination would be limited to the same 80,0000 lb. gross vehicle weight as any other tractor-trailer is. 34,000 lbs. on the drive axles max, steer axle may have up to 20,000 lbs on it. If you want to know what the weight limitations would be in accordance to the federal bridge law, see the related link at the bottom for a source where you can calculate it, but bear in mind that, if that is a 38 ft. trailer you're working with, you'll need to replace the given bridge measurement between the drive and trailer axles with the distance between the drive and trailer axles of your vehicle.


What is the empty weight for a 18 foot tandem axle trailer?

The empty weight of an 18-foot tandem axle trailer typically ranges from 2,500 to 4,500 pounds, depending on its construction materials and design features. Factors such as the type of trailer (utility, cargo, or enclosed) and additional equipment or options can also influence its weight. It's important to check the manufacturer's specifications for the most accurate figure.


What is the weight for a 26 foot twin axle nordic boat trailer?

The weight of a 26-foot twin axle Nordic boat trailer typically ranges between 2,000 to 3,500 pounds, depending on the specific model and materials used. This weight can vary based on features such as additional components, construction materials, and the trailer's overall design. Always check the manufacturer's specifications for the most accurate information.


What is rear gross axle weight?

imagine standing on a scale, your left foot would be front axle gross weight and your right foot would be rear axle gross weight. and the total weight is GVWR gross vehicle weight rating