0
What else can I help you with?
What is the unit weight of steel in ton per meter square?
you need the thickness too
What is the cost of steel per ton?
The cost of steel per ton can vary depending on factors such as market demand, production capacity, and type of steel. As of 2021, the price of steel ranges from $500 to $1,500 per ton.
How many lengths of 16mm rough steel in a ton and 10mm rough steel in a ton?
To determine how many lengths of steel can fit in a ton, you need to know the density of the steel and the specific weight of the steel per meter. Generally, rough steel weighs approximately 7850 kg/m³. For 16mm diameter rough steel, a typical weight is about 1.58 kg/m, allowing roughly 634 lengths in a ton. For 10mm diameter rough steel, it weighs about 0.62 kg/m, resulting in approximately 1,607 lengths in a ton.
How do you calculate the weight of a piece of steel?
by the ton
How many pieces in one ton of steel bar?
The number of pieces in one ton of steel bar varies depending on the size and weight of the individual bars. Standard sizes like 20mm or 25mm diameter bars can range from around 65 to 80 pieces per ton.
How many half inch steel make a ton?
The number of half-inch steel plates or bars that make a ton depends on the dimensions and density of the steel. Steel typically has a density of about 490 pounds per cubic foot. To calculate, you would need to determine the volume of a single half-inch steel piece and then divide the total weight (2,000 pounds for a ton) by the weight of that individual piece. For example, if each half-inch steel piece weighs 10 pounds, then 200 pieces would make a ton.
How much was a ton of steel in 1890?
In 1890, the price of a ton of steel varied depending on the specific type and quality of steel. On average, the price ranged from $30 to $100 per ton.
How many steel rods in a ton?
The number of steel rods in a ton will depend on the size and diameter of the rods. Typically, a ton of steel rods can range from around 540 to 650 rods, assuming they are standard size and weight.
How much synthetic enamel paint is required per ton of structural steel?
That is impossible to answer as paint is applied to a surface and while you have told us the WEIGHT of the steel to be painted, the information we need to know is the surface area of the steel.
Square meters in one ton of structural steel?
It is roughly 7.6m2 per ton of steel structure material. This can be used for approximate calculation.
How much is steel worth per ton?
5936 quid1000
How many Y16 steel bars to the TON?
Oh, dude, you're asking about Y16 steel bars? Like, who even knows that off the top of their head, am I right? Well, for your information, there are approximately 74 Y16 steel bars in a ton. But hey, who's counting, right?
