The Chevy 3500 Dually has been manufactured for many many years. It was first available in America the year 1960 and is still available as of the year 2013.
The weight of a Dodge 3500 dually pickup truck can vary depending on the model year, configuration, and optional equipment. However, a rough estimate would be around 7,500 to 8,500 pounds for a standard model.
1987 and up
1988 to 1999 will all interchange.
The Chevy Celebrity was produced in 1982 and manufactured by the American-made brand General Motors. In 1984, General Motors manufactured the Chevy Celebrity as a coupe.
The Chevy V8 was first manufactured in the year of 1916. They didn't run very long due to them being less efficient and the excessive weight of the Chevy V8.
NO IT WILL NOT.... You MUST stay under the year of 2000 to get the right 1
Yes. Your best bet is to get an axle out of a dually from the same year. If you can get the drive shaft and springs as well. Many 2500's have a Dana 70, while the 3500 has a Dana 80. This will make your drive shaft too long. We just did this and found out the hard way. You will also need an extension on the parking brake cable. The dually fenders are just a bolt on part.
1961 to 1979, then the name was rehashed from 1985 - 1988
Chevy began manufacturing the Tahoe SUV in the year 1995. And, the year before, Chevy manufactured the Yukon which is a very similar car. There are 2 types of Tahoe cars.
You can buy 1 from a Chevy dealer in KY. for $1300.00 with a 3 year warranty
That sensor was not used on that year. IT DON'T HAVE 1
The 350 (5.7L) Chevrolet was installed in the 1500, 2500, & 3500 Chevy trucks. The Chevrolet Silverado had the 350 that year.