0
When a projecting load extends to the rear four or more feet the bed or body of a vehicle in the daytime?
When a projecting load extends four or more feet beyond the rear of a vehicle during the daytime, it is typically required to display a red flag or a similar warning device. This is to alert other drivers to the extended load and ensure safety on the road. Additionally, the load should be secured properly to prevent shifting during transit. Compliance with local regulations regarding load extensions is essential to avoid penalties and ensure safe transportation.
What else can I help you with?
When a projecting load extends to the rear four or more feet beyond the bed or body of a vehicle in the daytime the extreme rear and sides of the load must be marked by four?
When a projecting load extends four or more feet beyond the bed or body of a vehicle during the daytime, the extreme rear and sides of the load must be marked with four visible flags or markers. These flags are typically red or orange and help alert other drivers to the extended load, enhancing safety on the road. Additionally, proper marking is required by law to prevent accidents and ensure visibility. It's important to check local regulations for specific requirements.
When a projecting load extends to the rear four or more feet beyond the bed or body?
When a projecting load extends four or more feet beyond the bed or body of a vehicle, it typically requires additional safety measures. This may include the use of proper signage, such as a red flag or light, to alert other drivers of the extended load. Additionally, the vehicle must adhere to local regulations regarding load extensions, which can vary by jurisdiction. Ensuring the load is secured and stable is also crucial to prevent accidents.
Assume that a load extends 4 or more feet beyond the bed or body of a vehicle driven on a highway in the daytime How many flags must be used to mark it and what color should they be?
4 red flags
Assume that A load extends four or more feet beyond the bed or body of A vehicle driven on A highway in the daytime how many flags must be used to mark it and what color should they be?
they are suppose to be red and you should (to be safe) have 2 one on each side.
Is a cape made of land or water?
A cape is a geographical feature that typically extends into a body of water, such as an ocean or sea. It is formed by the erosion of the coastline, resulting in a point of land projecting outwards into the water.
When a load extends to the rear feet or more the bed or body of the loaded vehicle it must be clearly marked?
4 ft.
A strip of land projecting into a body of water?
Cape
A cat extends its body to attack?
A cat extends its body as part of the attack.
Assume that a load extends 4 or more feet beyond the bed or body of a vehicle driven on the highway in the daytime How many flags must be used to mark it and what color should they be?
This answer is DIRECTLY from the Florida Drivers Handbook:In the day time,4 red flags at least 12 inches square must be placed on the projecting load where red lamps are used at night (extreme rear and sides)NOTE: if the trailer or motor vehicle is transporting logs, long pulpwood, poles or posts that extend more than 4 feet beyond the rear of the load, then you must have one amber strobe-type lamp equipped, so that the lamp is visible from the rear and both sides of the projecting load. The lamp must be operational and seen any time of day or night.>I hope this information was great use to you...GOOD LUCK on your exam! =D
When a load extends to the rear feet or more beyond the bed or body of the loaded vehicle it must be clearly marked?
4 ft.
A large mass of land projecting into a body of water?
peninsula
what is the meaning of Amputation?
The act of amputating; esp. the operation of cutting off a limb or projecting part of the body.
