The load should always be kept low whenever the forklift is traveling.
Only when it is safe to do so.
The load should always be kept low whenever the forklift is traveling.
To raise and lower the forks.
You raise and lower the forklift with the left analog button
An operator should raise a load when it is safe to do so and when the load is clear of obstacles, ensuring that the area is free from personnel and hazards. Lowering a load should occur when it is securely positioned and ready to be placed down, ensuring that the operator maintains control throughout the process. Additionally, operators should always follow safety protocols and manufacturer guidelines regarding load handling.
A hydrolic pump enables a forklift driver to lift. When a operator pushes the handle it allows hydrolic fluid to pass through the lines to the lifting forks, the pressure increases in the lines and lift the forks.
Go to parts store, go to oil section, find the oil labeled "hydrolick oil Daewoo G25S
lower
raise!
There are several types of forklifts... you could be referring to a typical warehouse forklift, a truck mounted forklift, or even a front end loader or skidster with a fork attachment. Generally, on a regular forklift, there will be three levers to the right of the steering wheel - one will raise the forks up and down, one will tilt the forks back or forwards, and one will move the forks left or right. A truck mounted forklift will also have levers to raise and lower the stabilizer feet and to extend the forks out. Whenever you have an object on the forks, you want the forks tilted back. You also want to keep the load as low to the ground as possible when the forklift is in motion. Whenever you stop and dismount the forklift, the forks should be lowered to the ground and the parking brake engaged. Those are just some basics - if you really want to learn this, find a place that'll teach you on-the-job. Learning the basic operation of a forklift is simple, but it's learning technique which is important, and that's not going to be learned by simply reading about it.
don't raise it whats the point of raising a 2WD its not 4x2 lower it or level it out don't raise it that's just dumb
Raise your arm above your head.