There are two small fuse boxes located at the rear of the engine compartment.Open the rear engine door and look to the lower right of the engine assembly. The two small covers,one above the other, held on with metal clips are the fuse boxes. The covers look somewhat like relays.
To open the fuse box on a Bobcat 763, locate the fuse panel, which is typically found under the operator's seat or on the right side of the machine. Remove any securing screws or fasteners if present, and gently pull the cover off to access the fuses. Always ensure the machine is turned off and key is removed before accessing the fuse box for safety.
How to remove the fuse box
It is a filter that is used for filtering the oil in a Bobcat 763.
The fuse box on a 773 Bobcat is located on the floor board of the operator's compartment. There are two bolts that have to be removed to access the fuse box.
The car.
The motor oil capacity of a Bobcat 763 skid steer is four quarts. The Bobcat 763 skid steer hydraulic oil capacity is three gallons.
in the fuse box =]
how to change the drive belt and new idler pulley on a 2002 763 bobcat. how hard 1 -10
there is no hydraulic drain plug on a bobcat 763 you need to pull a line off the bottom of the tank like when you change the case drain filters
under the seat
How do you drain the hydraulic tank or 763 bobcat skid steer
With a new filter it is 7.5 quarts