There should be a cap on top of the valve cover. You can also fill at the dipstick.
On the Massey Ferguson 165 tractor, the engine oil fill is located on the top of the engine block, typically towards the front or side. It is usually marked with an oil can symbol or labeled "Oil Fill." To access it, you may need to remove the oil filler cap to add oil during maintenance. Always ensure the tractor is on a level surface before checking or adding oil.
There should be a cap on top of the valve cover. You can also fill at the dipstick.
On a Kioti CK30, the hydraulic fluid fill is typically located on the right side of the tractor, near the rear of the machine. You can find the fill cap on the hydraulic reservoir, which is often labeled for easy identification. Always ensure the tractor is on a level surface and that the engine is off before checking or adding hydraulic fluid. For specific details, refer to the owner's manual for your model.
The fill spot for hydraulic fluid on a Ford 8000 tractor is typically located on the rear of the tractor, near the hydraulic reservoir. Look for a fill cap on top of the hydraulic oil reservoir, which is usually marked for easy identification. Be sure to check the owner's manual for the exact location and specifications for filling the hydraulic fluid.
on right hand side of engine. Maybe I need a picture becouse I can't find the fill port.
on right hand side of engine. Maybe I need a picture becouse I can't find the fill port.
In a John Deere tractor 5200, the engine oil is typically added through the oil fill cap located on the top of the engine. First, ensure the tractor is on a level surface and the engine is off and cool. Remove the cap, use a funnel if necessary, and pour in the appropriate type and amount of oil as specified in the owner's manual. Always check the dipstick to ensure the oil level is within the recommended range before starting the tractor.
On the slightly newer CK20S, if you are sitting in the tractor seat, the hydraulic fluid fill will be near your right hand as you reach down below the seat. It has a red cap on it that says "oil". This is NOT the engine oil, but rather the hydraulic oil.
You can fill them with water.
under the seat of tractor is the hydraulic reservoir. fill it to the line on the dipstick.
The hydraulic fill is a pipe plug just to the left of the shifting lever as you sit on the tractor.
I believe that's 4.5 quarts with engine oil filter change for the 1965 Ford Mustang 200 cubic inch straight 6 cylinder engine