In a 1998 Toyota Hiace, the fuse for the clock is typically located in the fuse box under the dashboard on the driver's side. Check the fuse diagram on the cover of the fuse box to identify the specific fuse associated with the clock, which is often labeled as "clock" or "accessory." If the clock is not functioning, inspect this fuse for any signs of damage or a blown filament and replace it if necessary.
next to the clutch pedal, there is a smaller fuse box for the normal fuses
The fuse box on a 1990 Toyota Hiace is located on the driver's size below the steering wheel. The fuse box has a cover over it.
A person can get a diagram of a fuse box for a 1986 Toyota Hiace from a Toyota dealership. An auto parts store may also give you a diagram of the fuse box.
In my 2001 CRV, the clock and radio fuse are the same. Funny, mine keeps blowing though... I keep taking it back to the dealer. They are trying to figure out why.
In fuse box under steering wheel near floor
a clock fuse....duuh
fuse panel is located below the dashboard , next to the clutch or brake pedal.
Check the fuse box for bad fuses.
In a 2008 Toyota HiAce, the fuse for the power windows is typically located in the fuse box under the dashboard on the driver's side. You can find the fuse box by opening the driver's door and looking under the dashboard near the steering column. Refer to the owner's manual for the exact fuse number and specifications to ensure proper identification and replacement.
On a 2002 Toyota Hiace (Not LWB) 5 speed Manual gear box delivered in Australia (Right hand drive) the fuse panel is located above the Clutch Pedal. Hope this helps.
Just to the left and behind the clutch peddle.
In my 1997 CR-V, there is no clock fuse listed on the fuse box. By the way, when my clock lamp (LED?) stopped working intermittently, my UK dealer explained that the clock was a sealed unit and was very expensive to replace. My clock lamp finally failed completely (the clock may be okay ... I cannot tell). I fitted a new cheap clock to the dashboard, using the gap around the factory clock to host the screws. I also eventually bought a new audio unit with a clock display.