On the drivers side of the throttle body. Mine is to the rear of something that looks similiar and both have flanges with two screws holding them on with wires connected.
The 1989 Chevrolet S 10 pickup idle control valve is located on the side of the engine. You will find the valve below the fuel injector pump.
the air intake valve is located on the side if your air cleaner/air box.
Remove the air filter housing. Now look to the left and right beside the valve cover you will see a FLAT squire black electronic device that will have at least 6 wires pluged into it. That will be it.
Show me where that air valve control valve is located on a 2000 navigator
It does not have a heater control valve.It does not have a heater control valve.
The expansion valve is located in front of the evaporator core. You must remove the housing to access it.
0443 Evaporative Emission Control System Purge Control Valve Circuit Malfunction This is the canister purge valve located on lower passenger side of engine accessible through right wheel well.
The idle valve is located under the intake manifold. It has to be removed from the bottom of the vehicle. Have a 2.6 Isuzu pickup and i had to replcace it.......hope this helps
heater control valve located on 2001 gmc jimmy 4.3l
well is htr control valve
On a 1987 Nissan Hardbody Pickup, the PCV valve is located between the alternator and the oil filter. The valve can be seen when the oil filter has been removed.
It is in the top of the valve cover. It has a black plastic line coming from the throttle body housing and going into one of the valve covers. It will be stuck in the end of the line and down into the valve cover.