0
What else can I help you with?
What is the difference between an internal IP and an external IP?
internal ip is ur lan ip external ip is ip of wan that is provided by isp
What does ip routing enabled mean?
Enabling routing on a layer 3 switch.
What is the difference between your IPv4 address and your IP address?
IP is the internet protocol that uniquely identifies a system on a network and there is no difference between IP and IPv4 infact IPv4 is a version of like IPv6.
Difference between classful and classless ip addresses?
The difference between classful IP addressing and classless IP addressing is in selecting the number of bits used for the network ID portion of an IP address. In classful IP addressing, the network ID portion can take only the predefined number of bits 8, 16, or 24. In classless addressing, any number of bits can be assigned to the network ID.
Which part of an ip packet does the router use to make routing decisions?
the network portion of the destination ip address
What is Difference between IP Base and IP Services in switches?
IP base support static routing and default routing but ip services supports dynamic routing like ospf ,bgp and eigrp.
What is difference between H.248 and SIGTRAN?
h.248 helps mgc controle mg. sigtran helps ss7 transported through Ip network.just so so.
What is the difference between direct and indirect routing?
When a system sends an IP packet to another system in a network, it is direct routing. When a system sends an IP packet to another system via a third system or more systems in a network, it is indirect outing.
What is an IP routing algorithm?
An IP routing algorithm is routing used for IP networks to forward datagrams over a network. You can learn more about IP routing algorithms at the Wikipedia.
What is the difference between classes of IP addresses?
difference between ip address and class
How do you enable ip routing to yes?
On a Cisco router, the command to enable IP routing (for IPv4) is:ip routingTo disable it:no ip routingOn a Cisco router, the command to enable IP routing (for IPv4) is:ip routingTo disable it:no ip routingOn a Cisco router, the command to enable IP routing (for IPv4) is:ip routingTo disable it:no ip routingOn a Cisco router, the command to enable IP routing (for IPv4) is:ip routingTo disable it:no ip routing
What is the difference between ip isdn pstn in computers?
What is difference between public ip and isdn
Which commands isolate routing table problems?
debug ip routing show ip route
What is the general difference between a static IP and a dynamic IP?
The general difference between a static IP and dynamic IP is that a static IP is reserved and does not change. A dynamic IP on the other hand changes each time one logs on.
What is the difference between IPv4 and IP?
IP is the internet protocol that uniquely identifies a system on a network and there is no difference between IP and IPv4 infact IPv4 is a version of like IPv6.
What does ip routing enabled?
Enabling routing on a layer 3 switch.
What is the difference between an ultimate route and a default route?
A default route is considered a gateway of last resort; meaning all ip packets that don't have a match in the routing table of a router will be forwarded to the default route. An ultimate route is a route in the routing table of a router that indicates both the next hop ip address and the exit interface.
