answersLogoWhite

0

Yes for most practical purposes these are compatible (as long as these are same form factor). If you have a motherboard which supports DDR400. You can install any of the DDR266, DDR333, DDR400 modules. All these memories will work (at the speed of the slowest speed memory).

- Neeraj Sharma

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Computer Science

What are some examples of computer motherboards compatible with PC3200 DDR400 memory?

Some examples of computer motherboards compatible with PC3200 DDR400 memory are computers with XD motherboards which run a lot faster and have more raw access memory.


What is PCMCIA stand for?

PCMCIA stands for Personal Computer Memory Card International Association. It is a standard for externally accessible expansion slots that accept cards that are compatible.


Are non eec computer compatible with eec memory?

This varies between motherboard manufacturer's. You would need to contact your motherboard manufacturer e.g ASROCK to find out for sure.


How do you fix a printer that is short on memory?

Almost always it is not the printer that is short on memory, but the computer that is using it. And in fact, the computer may not be short on memory, but on disk space. The first fix, then, is to check that the disk drive where the print queue is kept (usually C:) has at least some free space. With modern operating systems (Windows XP and later), at least 500 megabytes should be available on your C: drive. If the printer itself is reporting that it is out of memory on its display, the only solution is to buy more memory for the printer. Most printers that use their own memory, rather than relying on the computer for storage, will have memory slots where some form of memory cartridge or stick can be inserted. Do not assume that if it is a standard size, that it is also a standard memory; printer manufacturers have proprietary memory, just as they have proprietary cartridges, and inserting standard computer memory into a printer's memory slot can destroy both printer and memory, and will certainly void any warranty you have. Contact the store where you bought the printer, or the printer manufacturer, for sources of compatible memory. Older printers would actually require that you buy an entire memory board, and install it inside the printer housing. Some such memory boards are available on eBay or other auction sites. If you need one, be certain that the memory board is for your exact model of printer, and check the seller's feedback before bidding.


The two types of primary memory are?

Volatile memory refers to RAM that needs to be constantly refreshed to be retained. Static memory is permanent storage that is retained even after the computer is turned off.

Related Questions

Will DDR400 modules work slower in a DDR266 motherboard?

Yes.


What are some examples of computer motherboards compatible with PC3200 DDR400 memory?

Some examples of computer motherboards compatible with PC3200 DDR400 memory are computers with XD motherboards which run a lot faster and have more raw access memory.


What will happens if you put a DDR400 Memory in a DDR333 Maximun DIMM?

Your motherboard might be able to 'clock back' the DDR400 to DDR333. This means that the DDR400 ram will reduce it's clock speed to DDR333 to be compatible. Not all motherboards support this though.


When was the DDR400 memory first available on the market?

The DDR400 memory modules for computers were first available on the public market in 2002. It was the largest volume of memory available in one place at the time is was released.


What is the price of a DDR266 RAM?

The procie varies depending on the locale and size of the memory as well as its speed.


Can you use DDR400 on a P4VXASD2 motherboard?

No you cannot the ECS P4VXASD2 supports the following:Two 184-pin 2.5V DDR SDRAM (DDR266/DDR200) Maximum: 2GB DDR or SDRAM (Buffered) / 1GB DDR or SDRAM (Unbuffered)


Does compaq presario 5430 support memory ddr400?

http://www.vikingcomponents.com/configurator/searchmodel.asp Go here. You can find out from this website.


Where can one purchase PC3200 DDR400?

One can purchase a PC3200 DDR400 from the website Ebay. Once on Ebay one can find a seller who is selling the PC3200 DDR400 and make a bid in order to purchase it.


Can ddr 400 work on a ddr 333 system?

Yes it can....DDR memory will adjust its speed to the lowest speed of the board or the other memory chip. If the other memory chip is DDR333 the DDR400 will down clock itself to 444 to be compatible. Sometimes you might need to adjust certain settings in the BIOS to accomplish this (timings, latency, etc.).


Will pc133 sodimm work in a ddr266 sodimm slot?

No.


What memory modules can be installed at a 333MHz bus speed and operate at that speed?

DDR SDRAM memory modules can be installed at a 333MHz bus speed and operate at that speed. Specifically, DDR400 (PC3200) memory modules typically operate at 333MHz bus speed.


What type of memory card is compatible with the Canon 60D?

The Canon 60D is compatible with SD (Secure Digital) memory cards.