Conventional PCI now has four types of slots and six possible PCI card configurations to use these slots
http://wiki.answers.com/Q/Conventional_PCI_now_has_how_many_types_of_slots_and_how_many_possible_PCI_card_configurations_to_use_these_slots"
There are two types of Network Config, they are peer to peer or Client based.
The three possible types of modification problems are: Deletion, update, and insertion problems
Memory slot is a place where a memory can introduced to a system. It is an interface to add a memory device. This can be various types. For introduce primary memory we use tha RAM slot. Or for secondary memory interfacing we use different types of interfacing, such as PATA, SATA etc. But for RAM interfacing we require to match FSB (BUS Speed) of the memory device, such as FSB 400 or 667 or 800 etc. External chache is noting but a chache memory that is attached to a computer system to optimise its performance. It is used to boost up the performance of a conventional computers.
Theoretically, any type of device that can be installed in a computer can be connected through a PC card. In practice, it is used most often for network cards and modems. Video cards, SCSI controllers, USB hubs, GPS receivers, CompactFlash readers, and sound cards are all possible, but far less common than networking equipment for PC card / CardBus slots.
An expansion slot on the computer is basically add other hardware or peripherals, such as graphics cards, sound cards, and network cards. The expansion slots consist of usually 2 things. The first is the PCI or AGP slot that is on the motherboard itself. The second part is built onto the case. It is pretty much a docking station where you screw the card to the case. An expansion slot on the computer is basically add other hardware or peripherals, such as graphics cards, sound cards, and network cards. The expansion slots consist of usually 2 things. The first is the PCI or AGP slot that is on the motherboard itself. The second part is built onto the case. It is pretty much a docking station where you screw the card to the case. by: tink
4 Slot types and 6 possible configurations.
There are no guidelines on the number of expansion slots a system can have. Depending on case style, the number can vary between zero and eight.
it will be written in the upper left hand corner of the cardYou can also tell by the location of the notches on the bottom of the card.A notch in a PCI slot distinguishes between a 5-V slot and a 3.3-V slot. A Universal PCI card can use either a 3.3-V or 5-V slot and contains both notches. Conventional PCI now has four types of slots and six possible PCI card configurations to use these slots.
phone are
what are conventional symbol
Many conventional plastic types such as polyethylene (PE), polypropylene
PCI, AGP, and ISA are types of expansion bus slots. These slots allow you to attach internal peripherals such as video cards, hard drive controllers, modems, tuner cards, and other things.
Some types of slot games are Straight Slots that pay on the standard pay table,Progressive Slots that the pot goes up per play, and Bonus Game Slots that give spins for no extra money.
There are several types of gearboxes and each is specialized for certain applications. Some of the configurations are helical, bevel, spur, worm, and planetary.
There are two types of Network Config, they are peer to peer or Client based.
Define "conventional." There are many types of bales that are considered conventional from small squares to large round.
fiber cable dia meeter