Stack emissions are gases that are released into the atmosphere from industries. Flue gases are exited via a flue especially in power plants.
Depending on the use , Static data is data that cannot change it is Static so is usually set at the start of the program and cannot change, In the Forth programming language the stack is the work area of memory you place data onto the stack to manipulate it (example Place 2 and 3 onto the stack, execute the + command removes the top 2 items off the stack adds them together and places the result back onto the stack.)
To stack routers means to physically stack routers. Some stack a couple of routers on top of each other if they plan to just use them as switches or similar.
A push down automaton can actually store information in a stack as it processes it. It can then choose what to do next by looking at the top of the stack. DFAs and NFAs can't do that stuff, but any DFA or NFA can also be represented as a push down automaton.
The Stack class represents a last-in-first-out (LIFO) stack of objects. It extends class Vector with five operations that allow a vector to be treated as a stack. The usual push and pop operations are provided, as well as a method to peek at the top item on the stack, a method to test for whether the stack is empty, and a method to search the stack for an item and discover how far it is from the top.
Thuynch2003@yahoo.com stack overflow at line 158
what is the causes of asthma
there is nothing called stack entry :p
Stack sampling is a process of gathering representative samples of the gases (pollutants) in an industrial smoke stack to determine its composition. The physical environment in a stack is complex and stack sampling involves fair amount of physical modelling to ensure the gases samples represent the average gas composition in the stack. Stack sampling can also by done by passing a beam of light through the stack gases and observing the absorption spectra.
I want see them simultaneously
- In your own words, define the term 'protocol' and what is the difference between protocol and protocol suite
In stack , the object which is last in will be first out (LIFO), whereas in queue the object which is first in will be first out (FIFO).
There is no difference. They both refer to the product that leaves a furnace post combustion
Both of them are pointers, but otherwise they are completely unrelated. The former points to the current position of the stack, the latter points to the current instruction of the program.
RET pops the PC off of the stack, while IRET pops both the flags and the PC off of the stack.
We can calculate Stack height by using this formula H = 14*Q^2.3 where, H - Stack height in m Q - Emission rate of SO2 (kg/hr)
A stack vent is is the extension of a soil or waste stack above the highest horizontal drain connected to the plumbing stack Vent stack a vertical vent pipe extending through more then two stories which is then connected to a stck vent or is otherwise extended throgh the roof, installed primarily for the purpose of providing circulation of air to and away from any part of the drainage system
Oil burners are fan powered, the blower drives the exhaust gases away, not draft. Stack draft ,when measured will be a negative # when referenced to atmosphere. Oil burner gases are pushed out by the blower resulting in a positive stack pressure.