Straight Cable is used to connect a device to a different type of devices
Eg:
PC to a Switch
PC to a Hub
Switch to a Router E.t.c.
Cross Cable is used to connect a device to a similar type of devices
Eg:
PC to PC
Switch to Switch E.t.c.
Hybrids are animals that have been born from a union of two different species. Examples include Zonkey - cross between a donkey and zebra; Liger - cross between lion and tiger; Jaglion - cross between jaguar and lion; Zubron - cross between domestic cow and European bison; Cama - cross between camel and llama.
Sort of a cross between an apple and an orange.
The derivative of binary cross entropy is calculated by taking the difference between the predicted probability and the actual label. This difference is then multiplied by the input data to get the derivative.
Straight through ethernet cable (CAT 5/5e/6)
straight cable is needed when connecting two computer periperhals. A cross over is used when connecting a computer to a network hardware (router, swirch, etc..)
what is different between cross cabling and straight cabling ANSWER: a crossover cable is used to connect like devices, like a router to a router, but a straight through cable is used to connect dissimilar devices, like a router to a computer.
A hub uses straight throught cabling from clients to the hub, and uses a cross-over cable with the up-link ports to connect hubs to hubs. Usually, the cabling is UTP (Unshielded Twisted Pair) wiring.
Commonly a FIBER cable will be used to do a vertical cross-connect.
fiber optic
Horizontal cabling is the cabling that connects the work area telecommunications room to the horizontal cross connect.
In the Telco Room pg. 119 Network+Guide to Networks Edition 4.
Straight lines that never cross are called parallel lines.
It's pretty simple, really: a cross crosses the body so the fist ends up on the opposite side; a straight punch is, well, straight, and the fist ends up more or less directly in front of where it began.
It is around 3 kms. Just cross the tunnel and go straight.
No, a rectangular prism's cross-section will always have between 1 and 4 (inclusive) straight lines only.
parallel
Straight cut is like taking a scissors and cutting straight up the paper about quarter inch wide and full length of the document. The cross-cut is also known as the "Confetti" cut. Small pieces of the shredded document, about a quarter inch wide and inch long.