0
Do the servers and the workstations share the same network portion of IP address as your workstation?
Wiki User
∙ 9y ago
Servers and workstations Êcan share the same subnet ( a network portion of IP address). However, it is recommended you use different subnetsÊwhen there are several network devices.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
What are two parts that make up network address called?
Network Portion Host Portion
What portion of the IP address does the prefix represent?
It represents the network portion
What is the network portion of 177.100.18.4?
This is a class C address. The network portion is the first three octets, so it would be 209.240.80.0.
Which value represents the host portion of IP address 128.107.10.11 with a subnet mask of 255.255.0.0?
Seeing as the IP address of 128.107.10.11 is a class B network, the host portion is 10.11
How many bits comprise the network portion of a class c address?
Thirty bits make up the network portion of a class C address. Three bits are borrowed for the subnet mask. There is also a class A and a class B that are comprised of bits.
What part of an IPv4 address specifies a particular network interface on the network?
The host portion specifies the particular network interface's address. The network portion specifies the network address.
What are two parts that make up network address called?
Network Portion Host Portion
What portion of the IP address does the prefix represent?
It represents the network portion
How do you know how many bits represent the network portion and the host portion?
When we express an IPv4 network address, we add a prefix length to the network address. The prefix length is the number of bits in the address that gives us the network portion. For example, in 172.16.4.0 /24, the /24 is the prefix length - it tells us that the first 24 bits are the network address. This leaves the remaining 8 bits, the last octet, as the host portion.
What is used to of an IPaddress from the network address separate the host address portion?
To seprate an ip address from the network address we use subnet mask that can seprate the ip address from the network address
When the host portion of an IP address is all binary ones?
The host portion of an IP address of all zeros indicates that you are referring to 'this network'. For example, the address 145.5.0.0 means the network 145.5
What is the difference between a Network address and Broadcast address?
When you set up a sub network you decide upon the subnet mask and this determines the network address (all zeros in the subnet portion of the address) and the broadcast address (all ones in the subnet portion of the address). When you assign the host addresses in your subnet, then you use the addresses between the network address and the broadcast address.
network portion of these addresses: 209.240.80.78?
This is a class C address. The network portion is the first three octets, so it would be 209.240.80.0.
What defines an IPv4 logical network?
Hosts with the same network portion of their IPv4 address.
Does the first portion of each IP address identify the network?
no
Why do you AND ing the subnet and ip address?
Because this is the way you can easily and quickly isolate the network portion from the host portion of the address to just get the network id, which would be using for routing purposes.
What is a public ip different then network id?
An "ip address" is a complete source or destination address that has a network id portion and a client or host portion. The network id is just a piece of the IP address. So, a public ip is an IP address that can be routed, whereas the network id is just a part of the public ip. They aren't different; the network id is part of the ip address.
