answersLogoWhite

0

In GATE 0 represents OFF and 1 represents ON

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Computer Science

What happens when a stronger signal and a weaker signal both overlap at the same frequency in frequency modulation?

If one signal is weaker and the other is stronger, the receiver captures the stronger signal and completely ignores the weaker one, resulting in adequate reception.


What is input output technology for multimedia?

Iput: This is the act of entering information. For example when you type a word each letter is made up of numbers: one's and zero's. Now those one's and zero's are translated into the actual word you typed and you can now see the word in the screen hance the Output.


How do you make electricity into the computer?

A computer operates by working with pulses of electrical energy. Depending on the voltage of the pulse, it represents either a zero or a one. Electricity is also need to spin the disc drives.


Why using fios does your telephone voice communication shore the fiber optic cable with internet data?

The services are able to share the same data cable - because each separate signal is sent in 'packets' of data - each with its own security tag - to stop cross-over from one to the other.


Why is digital technology preferred to analog technology in communications technology?

Why digital communications and what its advantages over analog communication ,first you have to know what is the difference between analog signal and digital signal. Analog signal analog signal is continuous time signal i.e. it has a value at any moment of time and it has infinite number of valus , such as dinusoidal signal ,you can substitute X with any value and you will have an value in Y in the follwing sin relation Y=sin(X). 1-Noise and destortion immunity:-when analog signal is transmitted in free space for long distances it will be distorted and no an ideal recovery done in receiver to recover the exact signal which transmitted ,but in digital communication digital signal consist of 2 levels only zero or one (not like the analog one , it has infinite numbers of values or levels at each period of time),so digital signal can be recovered easily and excactly like transmitted one. Hint : Device that used to pattially recover the analog signal after a certain distance is called repeater ,from its name it receives transmitted analog signal and filter it and amplify it and transmitt it),but in digital transmission it is different ,the device used for recovering digital signal which transmitted from acertain distance is called regenerative repeaters ,it receives transmitted digital signal and recover it to regenrate a new exact signal like received one then retransmitt it for further distance. 2-More privacy and security due to encryption. 3-Error detection techniques can be used and correction as well. 4-Easy for processing and applying multiplexing techniques. 5-Low cost. 6-Transmission rate can be changed easily. 7-Digital hardware implementation is flexible and permits the use of micrprocessors, digital switching elements and layer scale. Thanks for reading H.M.S

Related Questions

What is a zero-order hold?

A zero-order hold is a mathematical model of the practical signal reconstruction done by a conventional digital-to-analogue converter, describing the effect of converting a discrete-time signal to a continuous-time signal by holding each sample value for one sample interval.


How do you write 0.013 in word form?

To write 0.013 in word form, you would say "zero point zero one three." This represents the numerical value of 0.013 in words, with each digit being pronounced individually.


How do you write 0.01 in word form?

One hundredth.


Express in words 0.101?

One hundred and one thousandths.


How do you write 0.00004 in words?

To write 0.00004 in words, you first say "zero point" for the decimal. Then, you say each digit after the decimal individually, so it would be "zero point zero zero zero zero four." This represents the value of 0.00004 in words.


What is One's compliment in binary numbers operation?

This is an operation in which each zero is changed to a one, and each one is changed to a zero.


What is the decimal 00001 in words?

Tenth = 0.1 Hundredth = 0.01 Thousandth = 0.001 Ten-Thousandth = 0.0001 Hundred-Thousandth = 0.00001 Millionth = 0.000001


What is 0.010 in word form?

0.010 in word form is "ten thousandths." This is because the zero before the decimal point represents no whole units, the one after the decimal point represents one tenth, and the zero after the one represents no hundredths. Therefore, 0.010 can be read as "ten thousandths."


How do you write one thousand and five dollars?

To write one thousand and five dollars, you would write it as "$1,005.00." The number "1" represents one thousand, the number "0" represents zero hundreds, the number "0" represents zero tens, and the number "5" represents five ones. The decimal point separates the whole number (one thousand) from the decimal fraction (five dollars). The double zero after the decimal point signifies that there are no cents involved.


How would you write 0.31 in words?

To write 0.31 in words, you would say "zero point three one." This represents the decimal number in its verbal form, with each digit spoken individually. It is important to note the place value of each digit when converting decimals to words.


What does one and zero mean in binary form?

The binary number 10 represents the number 2


Which number represents the value of the base in every number system?

10 (that is, one zero, not ten).