plug it in
You will need a cable that runs from the PC to the LCD projector. They usually come with the projector. If you turn on the computer, then turn on the projector, then connect the cable, it should automatically detect and appear on the LCD projector. Otherwise, you will have to configure some computer settings to output to the LCD display.
This USB device allows you to connect either an antenna or cable wire to your computer. It gives you the ability to watch TV directly on your laptop, as well as record tv shows.
An output device is anything that can output information from a computer. Therefore, a projector that is conected to a computer is as much an output device as a screen, a printer or communications port.
There are several ways to connect a television screen to a computer. The three most common interfaces that allow this are HDMI, DVI and VGA.
If you want to connect using cables/wires, you would have to use an Ethernet Cable.Or you can connect to it wirelessly. You must have a 802.11g wireless adapter card installed onto your laptop/computer.
You can connect one projector by HDMI and the other by VGA. This will allow you to connect two projectors to your computer.
A PC card is used to connect peripheral devices to a notebook computer.
You will need a cable that runs from the PC to the LCD projector. They usually come with the projector. If you turn on the computer, then turn on the projector, then connect the cable, it should automatically detect and appear on the LCD projector. Otherwise, you will have to configure some computer settings to output to the LCD display.
Connect the VGA monitor out on the PC to the VGA input on the projector. If your projector does not have a VGA or DVI input, the resolution of the projector is probably not high enough to adequately display the screen of a computer.
true
To set up a slide projector, one will need the correct equipment. Generally, one will need to connect the projector to a laptop or computer, then turn on the projector.
You can connect an Xbox 360 to projector by an HDMI cable or VGA.
It connects to a networked projector.
There are no projectors that can connect to a computer wirelessly as there is currently no wireless video specification.
It depends on video card. If you don't have DVI slot then you will have to get a female VGA to male DVI adaptor. the DvI would then go to M1 and connect at projector.
If you TV has output connection, then you can get cables to connect your TV to your projector. For example I have a TV with RCA video and audio outputs, I use 3 RCA cables and then I connect them to my RCA inputs into my projector. My projector has a small speaker, so most of the time I just connect the video cable.
yes through s-video card projector can connect to laptop