0
If it is programmable, the first thing you have to do is ensure that the computer you will use to program the chip has the right interface required to connect the chip and transmit to it. Traditionally, chips used to have serial connectors attached to the breadboard, but more recently, USB connectors are used on commercial chips such as the arduino devices. Once the chip is hooked up to the computer and is ready to receive the input, the programmer has to make sure of two things. First, it would be convenient for him to be familiar with a standardized programming language which he could use to write the program of the chip. Then, given he has a preference for a particular language, he needs to ensure that he has the right interpreter software that can communicate directly to the chip by translating the human friendly code into machine code, which basically is a sequence of 0s and 1s. Having the right interpreter is very important as it has to match the language that is being used to write the program. Once these requirements are met, write away!
What else can I help you with?
Which program does the acronym CHIP stand for?
California Highway Patrol.
What is skinware?
skinware is the outermost part of the computer. the CPU, monitor,keyboard,other things come under skinware
What is a programmable computer?
A programmable computer is one for which instructions on how to perform different tasks (programs) can be written/installed. A non-programmable computer comes with programs already installed and its software can not be readily changed.
When you use a PC you are using a?
o programmable console.
A ROM chip that can be programmed over and over using ultraviolet is known as what?
EPROM or Erasable Programmable Read Only Memory was invented by Engr. Dov Frohman. It is a ROM-type chip that can hold data from 10-20 years. It is different from PROM because it can be programmed more than once. An EPROM programming is erased only through exposure to ultra violet light. The EPROM is configured or reconfigured using an EPROM programmer.
What is a NE555 sound chip?
The 555 is not a sound chip, it is a general purpose programmable timer. As such, it is possible to program it to generate sounds or clock digital sound synthesizer chips.
How can you make a chip and implement it with a software program so that as your program it can work?
To make a chip and implement it with a software program, you need to "burn" the program into the chip before it can work. You must use special chips, called programmable read only memory chips, commonly called PROMs, for this. It also requires special machinery to program the chips.
What is the abbreviation for MIPS in Programmable system on chip?
the abbreviation for MIPS in Programmable system on chip is MEGA INSTRUCTIONS PER SECOND........
What is the v-chip?
The v-chip is intended to allow parents to block programs whose content ratings are deemed unacceptable
What is 1997 ford mustang key computer chip?
Its a programmable chip inside of the key .
How to program the TH5110D1022 Digital Non-Programmable Thermostat?
The thermostat is non-programmable. So you cannot program it.
What is Intel 8259 chip?
The Intel 8259 is a programmable interrupt controller.
What is EPROM in computer terms?
It stands for Erasable Programmable Read Only Memory. It's basically a computer chip that can have information programmed onto it - which stays on the chip even when the power is turned off (unlike RAM which is erased when you turn the computer off) The EPROM can be re-programmed by erasing the current information and re-writing new information to it.
What chip controls hardware interrupts?
Hardware interrupts can be controlled by the 8259 Programmable Interrupt Controller
What is a type of chip from which data can be erased by expoure to ultraviolate light?
A type of PROM (Programmable Read-Only Memory) called EPROM (Eraseable Programmable Read-Only Memory) is a chip that, after being programmed, can be exposed to strong ultraviolet light in order to erase it. They're recognized by the transparent window on the top surface through which you can see the silicon chip. It's through this window that UV enters to erase the chip.
Is the motherboard hardware or software?
Motherboards are hardware components, not software.
What is the meaning of non programmable calculator?
Most graphing calculators are programmable. The most common ones are the Texas Instruments, which include models 83 and up. Basically any calculator where you can create a program would be a programmable calculator.
