0
What else can I help you with?
What can bridges do that hubs and repeaters cannot do?
Bridges send information (data) to the specified destination, whereas hubs and repeaters do not.
Connectivity devices such as hubs and repeaters operate at which layer?
Hubs and repeaters operate at the Physical Layer of the OSI Model. The Physical Layer is the first layer of the OSI Model.
What is the explanation for the features of repeaters?
Signal strength diminishes over distance. A repeater boosts signal strength and passes it on.
What is the maximum number of repeaters a data packet may traverse on a 100BASE-T network?
4.4.4.4.
How many types of registers?
registers are five types.
What are the main uses for UHF repeaters?
There are many main uses for UHF repeaters. Examples of the main uses for UHF repeaters include transmitting different audio paths and receiving different audio paths.
How many types of guns where in the civil war?
There were approximatley 120 different types of guns in the civil war. There were many varieties of muskets, repeaters, pistols, ect. Many of these weapons were similar varieties of the same model of weapons. For example the union had muskets as well as the confederacy but they were different varieties.
Which network topology do nodes act as repeaters?
Star Topology, where Hubs can act as repeaters.
What are the Types of networking device?
1. Lan Cards 2. Lan cables 3. Repeaters 4. Hub 5. Switches.
What are types of network devices?
1. Lan Cards 2. Lan cables 3. Repeaters 4. Hub 5. Switches.
What type of networks are repeaters typically used?
Either a Bus topology or Wireless repeating, depends on how the question is stated...
What types of fireworks are there?
firecrackers,bottle rockets,repeaters,motors,rockets,spinners,roman candles, novelties,parachutes(novelties),and pin wheels,(etc.)
What kind of network infrastructure can have repeaters?
Wireless networks often use repeaters to extend the network signal to distant locations. Ethernet repeaters are commonplace as well, as there are limits to the lengths that cables will function at.
What can bridges do that hubs and repeaters cannot do?
Bridges send information (data) to the specified destination, whereas hubs and repeaters do not.
What can bridge do that hubs and repeaters cannot do?
Bridges send information (data) to the specified destination, whereas hubs and repeaters do not.
When was TBN repeaters in the Tampa Bay DMA created?
TBN repeaters in the Tampa Bay DMA was created in -199#.
How do repeaters help networks?
A repeater connects two segments of your network cable. It retimes and regenerates the signals to proper amplitudes and sends them to the other segments. When talking about, Ethernet topology, you are probably talking about using a hub as a repeater. Repeaters require a small amount of time to regenerate the signal. This can cause a propagation delay which can affect network communication when there are several repeaters in a row. Many network architectures limit the number of repeaters that can be used in a row. Repeaters work only at the physical layer of the OSI network model. If you more information you can visit website :http://www.iyogibusiness.com
