IPv4 addresses are 4 bytes. IPv6 IP addresses are 16 bytes.
The size of an IPv4 address is 32 bits, or 4 bytes.
IPV4 uses a 4 byte address, whereas the IPV6 uses a 16 byte address. IPv4 has a possible 4,294,967,296 IP addreses. The IPv6 has over 300,000,000,000,000,000,000,000,000,000,000,000,000 possible address's.
a TcP IPv4 ip address has 32 bits.
The network address of this ip address is 192.150.8 and 24 is host ip address
The IP address, '10.11.12.13' is not a valid address. This IP address is just a sample that is used.
In case of IPv4, the address has 4 bytes. In case of IPv6, the address has 16 bytes.
IPv4 => 32 bits => 4 bytes
In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.
Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.Within the local network, every computer has to have a different IP address. These IP addresses have to be in the same subnet; usually this means that the first 3 bytes are the same.
The size of an IPv4 address is 32 bits, or 4 bytes.
IP version 6, also known as IPv6, IP next generation, or IPng. It uses addresses of 16 bytes, instead of the 4 bytes used in IPv4.
This is not a valid IP address - a valid IP address has 4 bytes. Also, you can't guess the subnet mask from looking only at the IP address; there are usually several options.
4th longword (bytes 13-16)
Ip means internet protocol.If we want to connect internet or communicate two or more system we need a ip address. ip address provided by internet service provider. Each system has unique ip address. ip address consists of 4 bytes seperated by dots. There are two types of ip address available: 1)Internal ip address 2) External ip address 1) Internal address means our system ip address.i check my internal ip address in my windows xp using Dos command. you can also find internet ip address this method. 2)External ip address means internet ip address. It is provided by internetsevice provider I check my external ip address using this site ip-details.com . Here you can also search ip,domain host iplocation,Country,Latitude and Longitude details and etc.
An IP address consists of 4 octets (or bytes), of 8 bits each. It is written as pointed decimal, each byte separated from the others by a point, for example: 10.0.5.255.
An "Internet Protocol Address" uniquely identifies a node on the Internet. Some IP address ranges are reserved for LAN use and do not appear on the full Internet WAN, allowing local nodes to actually have the same IP address but not conflict (this increases the number of allowable nodes without having to expand the size of an IP address). The original IP address was defined to be 4 bytes (octets) long, however the Internet eventually outgrew this and an alternate expanded IP address defined to be 6 bytes (octets) was defined to support the new nodes.
IP(instruction Pointer) is a processor Register IP store the offset address of the next instruction IP can be modified by Jump & call condition IP can Increment by 1,2,3.......bytes Regard:tiger_ucet@yahoo.com