0
What else can I help you with?
What is the difference between shutting down your computer and putting it into sleep mode?
Generally speaking, yes, it is better to put the computer to sleep than it is to shut it down, for two reasons: 1. It's better for you - resuming from sleep mode is a lot faster than going through the entire boot up process. 2. It's better for the computer - resuming operation from a low-powered state is less harsh on you computer components than when you jolt it alive by turning the power on from a shut down state.
How can you figure out the administrator's account password?
Can't Log On to Windows XP? If that's your only problem, then you probably have nothing to worry about. As long as you have your Windows XP CD, you can get back into your system using a simple but effective method made possible by a little known access hole in Windows XP. This method is easy enough for newbies to follow it doesnt require using the Recovery Console or any complicated commands. And its free - I mention that because you can pay two hundred dollars for an emergency download of Winternals ERD with Locksmith which is a utility for unlocking lost Windows passwords. ERD is an excellent multi purpose product, but you should know it is not a necessary one if you have a healthy system and your sole problem is the inability to logon to Windows due to a forgotten password. Not necessary because you can easily change or wipe out your Administrator password for free during a Windows XP Repair. Heres how with a step-by-step description of the initial Repair process included for newbies. 1. Place your Windows XP CD in your CD-ROM and start your computer (its assumed here that your XP CD is bootable as it should be - and that you have your bios set to boot from CD) 2. Keep your eye on the screen messages for booting to your CD Typically, it will be Press any key to boot from CD 3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files. 4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now 5. The Licensing Agreement comes next - Press F8 to accept it. 6. The next screen is the Setup screen which gives you the option to do a Repair. It should read something like If one of the following Windows XP installations is damaged, Setup can try to repair it Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process. 7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes. 8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically you will see a progress bar stating Your computer will reboot in 15 seconds 9. During the reboot, do not make the mistake of pressing any key to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted. 10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system. 11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel. 12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you've made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy). 13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact. I tested the above on Windows XP Pro with and without SP1 and also used this method in a real situation where someone could not remember their password and it worked like a charm to fix the problem. This security hole allows access to more than just user accounts. You can also access the Registry and Policy Editor, for example. And its gui access with mouse control. Of course, a Product Key will be needed to continue with the Repair after making the changes, but for anyone intent on gaining access to your system, this would be no problem. And in case you are wondering, NO, you cannot cancel install after making the changes and expect to logon with your new password. Cancelling will just result in Setup resuming at bootup and your changes will be lost. Ok, now that your logon problem is fixed, you should make a point to prevent it from ever happening again by creating a Password Reset Disk. This is a floppy disk you can use in the event you ever forget your log on password. It allows you to set a new password. Here's how to create one if your computer is NOT on a domain: * Go to the Control Panel and open up User Accounts. * Choose your account (under Pick An Account to Change) and under Related Tasks, click "Prevent a forgotten password". * This will initiate a wizard. * Click Next and then insert a blank formatted floppy disk into your A: drive. * Click Next and enter your logon password in the password box. * Click Next to begin the creation of your Password disk. * Once completed, label and save the disk to a safe place How to Log on to your PC Using Your Password Reset Disk Start your computer and at the logon screen, click your user name and leave the password box blank or just type in anything. This will bring up a Logon Failure box and you will then see the option to use your Password Reset disk to create a new password. Click it which will initiate the Password Reset wizard. Insert your password reset disk into your floppy drive and follow the wizard which will let you choose a new password to use for your account. Note: If your computer is part of a domain, the procedure for creating a password disk is different.
When resuming from screen saver where can you enter the pas sword if you wants to protect your computer if needed?
The answer may vary with your computer operating system and the version of that system. In Windows 7, to turn on a screen saver password, go to Control Panel then Hardware and Sound then Power Options\System Settings under Password protection, you'll probably have to click : "Change settings currently unavailable", then click the little circle next to "Require a password" and the "Save changes" button.
How long after a fracture can you do martial arts again?
That will depend on the location of the fracture and your age. Consult your doctor before beginning or resuming training.
What to do when laptop resuming?
Wait
What is the procedure of resuming the game of football from a throw in?
The procedure of resuming the game of football from a thrown in is that the other team to have had the last touch are usually given the advantage to resume play.
What is preemptive process?
preemption (more correctly pre-emption) is the act of temporarily interrupting a task being carried out by a computer system, without requiring its cooperation, and with the intention of resuming the task at a later time.
Wael sharaf resuming in bab el hara 5?
he did.
What is hibermate in computer programming?
You probably mean "hybernate"; that refers to a computer saving all contents of its memory (RAM) to hard disk, so that it can be turned off, kept off indefinitely without using power, then turned on again (and memory reloaded from the hard disk), to let the user continue right where he was. For instance, any documents that were open when the computer was hibernated will be immediately available after resuming.
Is gray's Anatomy resuming soon?
Grey's Anatomy usually starts back up in September.
What is the abstract noun of resume?
The abstract noun forms for the verb to resume are resumption and the gerund, resuming.
Which major tourism destination is Qantas resuming flights to after four years of not flying there?
Gold Coast
When is Waterloo Road resuming?
Waterloo road series 8 is beginning in September- they haven't specified a date.
When are student loan payments resuming?
Student loan payments are set to resume on January 31, 2022.
