yes
Units of production method.
Factors of production typically include land, labor, capital, and natural resources. These inputs are used directly to produce a good or service. Technology, on the other hand, is used to put these factors of production to work. ... An improvement in technology usually means that fewer and/or less costly inputs are needed.
Avid Technology specializes in the production of audio and video production technology. These products are used in the creation of movies, television shows, and video games.
While the assembly line was used in the production of military goods, it is most commonly referred to as an innovation outside of combat and military pursuits.
Hydroelectricity is electricity generated by hydropower, i.e., the production of electrical power through the use of the gravitational force of falling or flowing water. It is the most widely used form of renewable energy.
yes
Today most tires are tubeless. Tubes can be fitted if there are many holes or patches.
Radial ply tires and tubeless tires are made from rubber, fabric, and steel.
Nitrogen is used in many tires and not specifically tubeless. It is used because it doesn't expand and compress like normal air does in altitude and temperature changes, which is why it is used in aviation applications.
As you probably know, Harley doesn't make tires and never have. But any Harley with factory wire wheels (spoke type) uses inner tubes, and any Harley with factory cast aluminum wheels can use tubeless tires. But not all tires can be used without a tube, it depends on the type and manufacturer. It will say on the tire's sidewall if it can be run tubeless. Harley first started using cast aluminum tubeless-type wheels in the late Seventies.
Usually, but not always, and it is rarely done. A tube would not conform to the inside arc of some types of tubeless tires, and on others might be overheated by friction and fail.
Yes, you can use a tube in a tubeless-ready bicycle tire, although it may not provide the same benefits as a tubeless setup. A tubeless-ready tire is designed to run without an inner tube, creating a seal against the rim that holds the air in place. When used with a tube, the tire will function in much the same way as a traditional tire and tube setup, but it may not provide the same level of puncture protection or weight savings as a true tubeless setup. Additionally, some tubeless-ready tires may not be compatible with certain types of tubes, so it's important to check the manufacturer's specifications before using a tube in a tubeless-ready tire.
Lubrication & production of fuel. Oil is also used in the production of tires, and thousands of other products.
Radial tyres are mostly tubeless nowdays and are the best available in the market. Radial Tubeless tyres use wire construction which distributes load and grip on the road evenly and is the best technology used. Compared to the old and cheap non-radial tube tyres which are more risky to drive in case of tyre failure. Drive safe wear a helmet weather your tyres are radial tubeless or not.
Sulfur is used in the production of matches, explosives, sulfuric acid, and tires.
Chlorofluorocarbons (CFCs) were commonly used in refrigeration, air conditioning, and aerosol propellants. However, due to their harmful environmental impact on the ozone layer, their use has been largely phased out under the Montreal Protocol.
Albuterol inhalers used to be powered by CFCs (chlorofluorocarbons). Because of the Montreal Protocol to phase out the use and production of CFCs, since 2008 all Albuterol inhalers are powered by hydrofluoroalkanes (HFAs).