0
Using the ruletrade good for suspected bad describe how easily troubleshooting a video problem?
Wiki User
∙ 12y ago
Trade the cord of the PC video port, move the video card to a new slot, and trade the video card.
I hope it will be the right answer!
ty denatra it was bery helpful and im going to give some hints too hope this helps
i believe you should ask yourself these questions:
1. is the monitor electrical caple plugged in?
2. is the monitor turned on? try pushing the power button on the front of the monitor it should turn yelow or green, indicating the monitor has power.
3.is the monitor cable plugged into the video port at the back of the PC and the connector on the rear of the monitor?
4.try a different monitor and a different monitor cable that you know are working
5. turn the monitor 180 degrees.
UndeadSoulz
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
When troubleshooting a computer problem after backing up the data?
wipe the hard drive
What is the first step you would take when troubleshooting an external network such as an Internet connection issue?
define the problem
When troubleshooting internal networks what should you do next after you make sure everything is plugged in and the power is on?
locate the problem
What TCPIP utility was the most useful in your opinion for troubleshooting these problem Why?
TCP IP utility was the most useful when troubleshooting for a few reasons. It contains important information like NetBIOS over TCP IP and there connections.
what is the similarities of preventive maintenance and troubleshooting?
Both have the end goal of reducing problems. Preventative maintenance, however, aims to do this by preventing them from occurring; troubleshooting is a process of identifying problems that have already occurred, by which the problem can be eliminated afterward.
What are widely used in troubleshooting a computer?
A number of tools are used in troubleshooting PCs. Diagnostic software and boot disks are probably the most common. If a hardware problem is suspected, then part swapping is used. Diagnostic cards are sometimes used too.
What is meant by troubleshooting?
Troubleshooting is a form of problem solving
What is troubleshooting in science words mean?
I don't know to be honest so you will just to have find out yourself. Troubleshooting is the process of investigating a problem with a device or system that is not working as expected. Typically it may be performed in two ways 1) Analytical troubleshooting which involves processes of deduction from observed symptoms or 2) Iterative troubleshooting which involves changing parts that are suspected of mulfunctioning with new ones.
What is the difference between troubleshooting and maintenance?
Troubleshooting is finding an existing problem and maintenance is preventing a potential problem.
Troubleshooting differs from diagnosis in that .?
troubleshooting focuses on how to fix the problem
What is troubleshooting stands for?
Troubleshooting is a word, that is often used in computer software, when errors occurs. It is a way of saying "Solving a problem" or to "look for a problem".
You're troubleshooting a user's problem What is the first thing you should do when troubleshooting?
ascertain the user's priorities
Which of the troubleshooting a computer problem involves?
trouble shooting
Brake system troubleshooting?
Please Define problem
What are the basic recommended steps for troubleshooting a cable problem?
1.Split the system into logical elements. 2.Locate the element that is most likely the cause of the problem. 3.Test the element or install a substitute to verify it as the cause of the problem. 4.If the suspected element is not the cause , move on to the next likely element. 5. After locating the cause of the problem, repair it or replace it.
What is the stages in the general troubleshooting process?
You correct the problem You gather symptoms You isolate the problem
A user is unable to send email while troubleshooting this problem?
A user is unable to send e-mail. While troubleshooting this problem, the network technician first verifies the physical connectivity of cables. Which troubleshooting approach is being followed? A: bottom-up
