answersLogoWhite

0

An ungated D latch in digital circuits is a memory element that stores a single bit of information. It has two inputs: a data input (D) and a control input (enable). When the enable input is high, the D latch stores the value of the data input. When the enable input is low, the stored value remains unchanged. This allows the D latch to hold and remember a bit of information until it is updated.

User Avatar

AnswerBot

6mo ago

What else can I help you with?

Continue Learning about Computer Science

What are the key differences between a D latch and an SR latch, and how do these variances impact their functionality in digital circuits?

The key difference between a D latch and an SR latch is in how they are triggered to change their output. In an SR latch, the output changes based on the state of the S (set) and R (reset) inputs. When both inputs are low, the latch holds its current state. When S is high and R is low, the output is set to high. When R is high and S is low, the output is set to low. However, when both S and R are high, it can lead to unpredictable behavior. On the other hand, a D latch changes its output based on the state of the D (data) input. When the clock signal transitions from low to high, the D latch captures the input data and updates its output accordingly. These variances impact their functionality in digital circuits as the D latch is more commonly used for data storage and synchronization, while the SR latch is more prone to issues like race conditions and unpredictable behavior due to its set and reset inputs.


What is latch output?

It's an output that is set to on by a momentary input. i.e. a pushbutton turns on a light and the light stays on even when the button is not pressed. The output is 'latched'.


What is the smallest memory size and how does it compare to a bit?

The smallest memory size is a single bit, capable of storing either a 1 or a zero. An electronic component that does this is known as a D latch and in it's simplest form has three pins. The data input pin will have the value to be stored. The clock or enable pin is the trigger to store the value on the data input pin. Finally the output pin will have the value of the stored data. These single byte memories can be bought as small integrated circuits. Add 8 of these latches together and you have a 1 byte memory. Add 1 byte memories together and you have the basis of computer memory as used in almost all processors.


How do you take the case off the computer?

Im having that same prob. I can get the bottom off easily but the top is SUPER stubborn. You can slide a credit card under neath the tabs. That seemed to work for other people even though that didnt work for me. What kind of computer? I have a macbook pro and that is hard. Depends wat kind of computer u have.


How can I optimize the design of a D flip flop for improved performance and efficiency?

To optimize the design of a D flip flop for improved performance and efficiency, you can consider using faster transistors, reducing the size of the flip flop to minimize propagation delays, and implementing power-saving techniques such as clock gating. Additionally, you can also explore using advanced circuit design techniques like pipeline stages or latch-based designs to enhance the overall efficiency of the flip flop.

Related Questions

What are the key differences between a D latch and an SR latch, and how do these variances impact their functionality in digital circuits?

The key difference between a D latch and an SR latch is in how they are triggered to change their output. In an SR latch, the output changes based on the state of the S (set) and R (reset) inputs. When both inputs are low, the latch holds its current state. When S is high and R is low, the output is set to high. When R is high and S is low, the output is set to low. However, when both S and R are high, it can lead to unpredictable behavior. On the other hand, a D latch changes its output based on the state of the D (data) input. When the clock signal transitions from low to high, the D latch captures the input data and updates its output accordingly. These variances impact their functionality in digital circuits as the D latch is more commonly used for data storage and synchronization, while the SR latch is more prone to issues like race conditions and unpredictable behavior due to its set and reset inputs.


What is an electronic latch?

An electronic latch is a simple bi-stable state-holding circuit. That means it has two stable "states", kind of like a light switch (ON and OFF). Once the latch is switched ON, it will stay there until it is switched OFF or until power is lost, and vice-versa. Latches can be built in a variety of ways, but the most commonly studied latch is the S-R latch made with NAND or NOR gates. In this latch, "SET" is the name of one state, and "RESET" is the other state: http://www.play-hookey.com/digital/rs_nand_latch.html Latches can be used to build memory circuits in digital systems. There are millions of latch circuits in a computer system.


Definition for latch on digital electronics?

latch is electronic circuit.....


What is flip flop and latch?

They are circuits that have an internal state.


How can I ensure proper installation of a gate latch for security and functionality?

To ensure proper installation of a gate latch for security and functionality, follow these steps: Choose a high-quality latch that is suitable for your gate material and size. Measure and mark the correct placement for the latch on the gate. Use appropriate tools to securely attach the latch to the gate, following the manufacturer's instructions. Test the latch to ensure it opens and closes smoothly and securely. Regularly inspect and maintain the latch to ensure continued security and functionality.


How can I adjust the door latch to ensure proper functionality?

To adjust the door latch for proper functionality, use a screwdriver to tighten or loosen the screws on the latch plate. Test the door to ensure it closes and latches securely. Repeat the process as needed until the latch functions correctly.


What is latch in microprocessors subject?

research flip-flop circuits.


How can I adjust the door latch to ensure proper alignment and functionality?

To adjust the door latch for proper alignment and functionality, you can loosen the screws on the latch plate and move it slightly to align with the strike plate. Tighten the screws back in place and test the door to ensure it latches properly.


Latch in logic gates?

i need to understand the meaning of latch as applied in logic gates [digital ectronics]


Why is 7475 IC chip is called a latch?

The 7475 IC chip is called a latch because it is a type of digital storage device that holds a binary state (0 or 1) until it is changed by an input signal. Specifically, it is a D-type latch that captures the value of the input data line when the enable signal is activated, maintaining that value even when the input changes, thus "latching" the data. This behavior allows it to store information temporarily, making it useful in various applications in digital circuits.


How can I effectively perform a door latch repair to ensure the security and functionality of my door?

To effectively perform a door latch repair for security and functionality, follow these steps: Remove the old latch and inspect for damage. Purchase a new latch that matches the size and type of the old one. Install the new latch according to the manufacturer's instructions. Test the latch to ensure it securely locks and unlocks the door. Make any necessary adjustments to ensure proper alignment and smooth operation.


What is the purpose of the sliding door latch plate and how does it contribute to the functionality of a sliding door?

The sliding door latch plate is a component that helps secure the sliding door in place when closed. It contributes to the functionality of the sliding door by providing a point of connection for the latch mechanism to hold the door in position, preventing it from opening unintentionally.

Trending Questions
What device are you transmitting to with the Format Prefix FF0E on a network running IPv6? What are the alternatives for connecting to a WAN? How do you make your computer say something when you turn it on or say when your battery's low? What layer of the OSI model does CDP work at? Given that a satellite signal travels at the speed of light exactly how long does it take for a signal to go from the Earth to a satellite in geosynchronous orbit and back to Earth Show the calculat? How do you set a digital relic watch? When was Skyline Aviation Software created? What are the operating systems used on Internet servers? How do you get arouned the school blocks? A computer is experiencing random reboots and phantom problem that disappear after rebootwhat should you do? What is the equipment used before cad? Would you recommend a divisional structure by geographic area product customer or process for a medium sized bank in your local area why? 13 What is the main reason why the old floppy discs have died out? How does a multitape Turing machine differ from a single-tape Turing machine in terms of computational power and efficiency? How can you get o'reilly's auto parts w2 off the internet? What icon allows you to view networked computers when a network card is installed? Under what circumstance might you use a loopback plug? What is process management in terms of computing? What provides redundancy through a process called disk mirroring? Is there a dbz saga 2 game?