Your work is bad dont do it
Shearadized is a metal coating for nails, bolts, washers, nuts and so on, that is similar to Galvanized.
No. "Fixed" means that they are permanently installed in the main frame or tower usually fastened by screws, nuts and bolts. The hard disks that are portable are often called "external drives" meaning that they are not mounted inside of a cabinet and can be freely moved from one location to another.
you can use these nuts
Nylon locking nuts, also known as ny-locks, have a small ring of nylon one one end that forms slightly smaller hole than the threaded hole going through the nut. When the nut is screwed onto a bolt, the bolt has to force its way through the smaller opening, causing the nylon to stretch. This stretching creates a huge amount of friction between the nut and the bolt, allowing the nut to stay tight for long periods of time without coming loose. Nylon lock nuts are especially useful for applications that involve a lot of vibration that would cause regular nuts to come loose.
The case is not normally considered computer hardware. However it is "hardware" in the same sense things that you buy in a Hardware Store are hardware (e.g. sheet metal, angle brackets, screws, washers, nuts, nails, plastic, paint).
Most of the construction was done using rivets, not nuts and bolts.
Most separation nuts are externally actuated using an impulse or pressure type cartridge.
you can view these nuts better
Nuts and bolts.
Having 6 points of contact rather than just 4 (for square bolts and nuts) reduces the tendency to damage the nuts by shearing the edges. Of course, square bolts have an advantage if using an alternative tool (pliers, lock-grips) to hold or turn the bolt, because there is a wider surface to grip than with hex bolts.
Nuts and bolts are solid cylinders with the head. Many companies manufacture nuts and bolts for supplying to other industrial firms. In every construction and industrial work, nuts and bolts are usable. To get more detail about the process and to make deal with a reputed company, contact Mig Enterprises, Fasteners Supplier Sydney.
Magnetic separation
To fit most nuts that you come across and use for those that you don't have the exact wrench.
Small nuts would be stocked by a nutseller and by a stockist of nuts, bolts and screws.
Nuts 'n Bolts - 2013 was released on: USA: 25 February 2013
Yes, they should be as tight as you can get with a 6 inch long wrench
A torque wrench is used to tighten nuts and bolts to a specified amount