Memory is a secondry storage media of computer
Generally, this is called ROM, or Read-Only Memory. Usually, such memory is used to store the BIOS, or Basic Input Output System.
A ROM (Read-Only Memory) in a computer is a type of memory that stores data permanently and cannot be easily changed or erased. It contains essential instructions for the computer to start up and perform basic functions, such as the BIOS (Basic Input/Output System). ROM functions by holding this critical information even when the computer is turned off, allowing the system to boot up and operate smoothly.
The five components of a computer:input devices, output devices,system unit,storage devices,and communications devices.
The ROM BIOS chip stores permanent instructions. ROM means read-only memory. BIOS means basic input/output system, meaning the very basic instructions needed to power up the computer. From there, the operating system loads.
.The operating system acts as the interface between the user and the computer. The two major functionalities of an OS are 1)Managing hardware/memory resources. 2)Providing an interface for the user to communicate with the computer
The system consists of CPU, Main Memory, I/O Module, and System Bus.
Permanent memory is non-erasable memory, so the right answer to this question is: ROM (Read Only Memory).
Generally, this is called ROM, or Read-Only Memory. Usually, such memory is used to store the BIOS, or Basic Input Output System.
A ROM (Read-Only Memory) in a computer is a type of memory that stores data permanently and cannot be easily changed or erased. It contains essential instructions for the computer to start up and perform basic functions, such as the BIOS (Basic Input/Output System). ROM functions by holding this critical information even when the computer is turned off, allowing the system to boot up and operate smoothly.
The five components of a computer:input devices, output devices,system unit,storage devices,and communications devices.
If you remove the read-only memory (ROM) from a computer, the system would lose essential firmware, which contains the basic instructions for booting up and initializing hardware components. Without ROM, the computer would be unable to perform critical functions, such as loading the operating system or executing the basic input/output system (BIOS). As a result, the computer would fail to start up properly and would be inoperable.
The BIOS (Basic Input Output System) is the first low level program that is loaded into the computer memory. This program performs initial hardware diagnostics memory, disk, I/O, video, etc., and then transfers to a boot program usually located on a hard disk.
ROM memory in a computer normally contains BIOS (Basic Input/Output System), which is the first program to run once a computer is switched on, before the operating system loads. It initializes and tests the system hardware. BIOS can be modified by flashing a new firmware, though it is not normally recommended.
The basic function of memory is to store information.
A memory component is a basic type of integrated circuit which is used to store data or computer programs.
CPU plus APU plus memory plus clock. Everything after that is plush.
It is Read Only Memory(ROM) BIOS, basic input/output system, is the system that first runs when a computer is powered on. The software is contained on a ROM chip on the mothrboard and is responsible for executing the boot sequence for different peripherals and the operating system