0
What else can I help you with?
What is a cat 5 cable and why is it used?
Cat-5 cable, sometimes called Ethernet cable, is short for Category 5 cable, a current industry standard for network and telephone wiring. Cat-5 cable is unshielded wire containing four pairs of 24-gauge twisted copper pairs, terminating in an RJ-45 jack. If a wire is certified as Cat-5 and not just a twisted pair wire, it will have "Cat-5" printed on the shielding.
Which wire is the Xbox live wire on a Xbox?
the wire you would be looking for is a cat 5 cable this is what connects the xbox to the router or modem
How many wire pairs in a CAT 5 cable are actually used for transmission and reception on a 10BASE-T network?
2 wire of pair
What is Cat5 and Cat6 phone wire?
Cat-5 and Cat-6 wiring allows you to connect up to 4 telephone numbers to one jack, since there are 4 pairs in the cable.
How to wire a Cat 5 cable for network connectivity?
To wire a Cat 5 cable for network connectivity, follow these steps: Strip the outer insulation of the cable to expose the inner wires. Untwist the pairs of wires and arrange them according to the T568A or T568B wiring standard. Trim the wires to the appropriate length and insert them into the RJ45 connector. Crimp the connector onto the wires using a crimping tool. Test the cable to ensure it is properly wired and functioning.
How can you tell the cat level of a cable?
You can tell the CAT level (or category) of a cable by looking for imprinted markings along the length of the cable. Look for the number preceded by 'CAT.' That is the category of the cable.
What does the term cat cables reference to?
'Cat cables' is a shortened term for 'category cables', which encompasses various standardised cables for Ethernet networks like the Cat 6 cable, or the Cat 5, or the Cat 5e. The wiring around the cat cables is usually colour-coded for ease of use by users and engineers.
Two types of cable in computers?
There is the USB cable and the twisted pair cable (Cat 5 and Cat 6) for networking.
What is a form of UTP that contains four wire pairs and can support up to 16 Mbps throughput?
CAT-4 cable meets those requirements.
How much copper in a foot of cat 5 cable?
There is not enough copper in a foot of cat5 cable to make reclaiming it worthwhile. At best, the wire will be no more than 5% copper. Additionally, opening the cable releases fumes that could potentially be toxic.
What is the difference between Cat 2 verses cat 3 cable?
Cat 2 cable was rated at 4 or 16 mbps whereas cat 3 cable would be rated at 10 mbps. Since 10baseT networks with Ethernet ran at 10 mbps this meant that cat 2 cable would not be useable in those networks. The minimum category cable for those networks had to be at least a cat 3 cable.
How many wires does a CAT-5 cable have a CAT-53 and a coaxial cable?
Cat-5 has 4 pairs and 8 wires
