0
What else can I help you with?
Cable used to connect a switch to a switch?
Crossover Cable (T568A on one end, T568B on the other)
Differentiante between cross cabling and straight cabling?
Straight Cable is used to connect a device to a different type of devices Eg: PC to a Switch PC to a Hub Switch to a Router E.t.c. Cross Cable is used to connect a device to a similar type of devices Eg: PC to PC Switch to Switch E.t.c.
What is the cable that connects a hub to a hub?
PATCH CABLE Patch cables provide a short-range connection, while longer Ethernet cables (usually Category 5, Category 5e, or Category 6) are used to connect to a hub up to 100 meters away.
The network administrator needs to connect two routers directly via their FastEthernet ports What cable should the network administrator use?
straight cable is needed when connecting two computer periperhals. A cross over is used when connecting a computer to a network hardware (router, swirch, etc..)
What kind of cable is used to transfer digital video to and from a computer and camcorder?
Transfer cable is used to transfer digital video to and from a computer and camcorder.
Straight- through cable is used to connect?
How can I configure straight through cable?
The enthernet port is used to connect a computer to?
The Ethernet port is used to connect a computer to a connectivity device such as a modem, router, switch,etc. Does so via an ethernet cable.
What would you use a crossover cable for?
To connect two devices of the same type together. e.g. You would use a crossover cable to connect a router to another router, a switch to another switch or a computer to another computer. If you are connecting diferent devices together, such as a router to a switch, a straight through cable should be used.
What cable is used to connect a modem and a switch?
cross cable
Which cable is used to connect a host to a switch?
Staright
Cable used to connect a switch to a switch?
Crossover Cable (T568A on one end, T568B on the other)
What cable is used to connect a switch to a router?
packaging tape
What cable is used to connect a router to a switch?
packaging tape
What is a straight cable?
In ethernet terms, a straight-through cable connects a client device to a hub, switch or router (straight-through meaning the connection is pin-to-pin, the opposite of a cross-over cable, which connects RX-TX and vice-versa).
When is a straight through cable used and when is a crossover cable used?
You need a crossover cable you want to connect two computers without a switch. If you want to use more than two computers (with switch) you have to use a straight pair cable. ---- Ethernet (up to 100 Mbit) communicates on four of the eight wires available. Two of the wires are used to transmit data, and two are to receive. Wires 1 and 2 transmit while wires 3 and 6 receive. With this in mind, on a straight through cable the wires are in the same position on both ends of the cable. On a crossover cable the wire that is in position one connects to position three on the other side, and the wire in position two connects to position six on the other end. Straight Cross 1---------------1 1------------3 2---------------2 2------------6 3---------------3 3------------1 6----------------6 6-------------2
Which type of port can be used to connect a TV to your computer?
An U.S.B cable.
Which cable is used to connect a router to a switch in packet tracer?
A straight-through ethernet cable.
