0
What command of the recovery console changes the current folder?
Wiki User
∙ 12y ago
CD
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the command to install the Recovery Console on the boot loader menu?
# Insert the Windows XP CD into the CD-ROM drive. # Click Start, and then click Run. # In the Open box, type d:\i386\winnt32.exe /cmdcons where d is the drive letter for the CD-ROM drive. In the case of 'Microsoft Windows XP Professional x64 Edition, type d:\amd64\winnt32.exe /cmdcons where d is the drive letter for the CD-ROM drive. # A Windows Setup Dialog Box appears. The Windows Setup Dialog Box describes the Recovery Console option. To confirm the installation, click Yes. # Restart the computer. The next time that you start your computer, "Microsoft Windows Recovery Console" appears on the startup menu.# Insert XP/2000 CD-ROM. # Open command. # Change the current directory to the \i386 folder on the XP/2000 CD-ROM. # Enter the command winnt32 /cmdcons. # The Recovery Console is installed.
What is the command line to use IPConfig to release the Current IP address?
ipconfig /release
What is IP config?
A Command run in the command prompt that will show the current information on all network connections to other devices, (Excluding USB, I394, etc.) including the ip addresses and M.A.C Addresses. Syntax: ( Under Command Prompt ) C:\Users\<USER>\ipconfig Main Syntax - ipconfig
16 read rfc 959 for ftp list all of the clients commands that are supported by the rfc?
FTP Client CommandsABOR Terminates previous command. ACCT Specifies account (ignored). ALLO Allocates storage (vacuously). APPE Appends to a file. CDUP Changes to the parent directory of the current working directory. CWD Changes working directory. DELE Deletes a file. HELP Gives help information. LIST Gives list files in a directory (this FTP request is the same as the ls -lgA command). MKD Makes a directory. MDTM Shows last modification time of file. MODE Specifies data transfer mode. NLST Gives a name list of files in directory (this FTP request is the same as the ls command). NOOP Does nothing. PASS Specifies a password. PASV Prepares for server-to-server transfers. PORT Specifies a data connection port. PWD Prints the current working directory. QUIT Terminates session. RETR Retrieves a file. RMD Removes a directory. RNFR Specifies rename-from file name. RNTO Specifies rename-to file name. SITE The following nonstandard or UNIX-specific commands are sup- ported by the SITE request: UMASK Changes umask (SITE UMASK 002). IDLE Sets idler time (SITE IDLE 60). CHMOD Changes mode of a file (SITE CHMOD 755 FileName). HELP Gives help information (SITE HELP). SIZE Returns size of current file. STAT Returns the status of the server. STOR Stores a file. STOU Stores a file using a unique file name. STRU Specifies the structure of data transfer as a file struc- ture. SYST Shows operating system type of server system. TYPE Specifies data transfer type with the Type parameter. USER Specifies user name. XCUP Changes the parent directory of the current working directo- ry (not normally used). XCWD Changes current directory (not normally used). XMKD Creates a directory (not normally used). XPWD Prints the current working directory (not normally used). XRMD Removes a directory (not normally used).
What is the purpose of using the copy tftp flash command on a router?
What is the purpose of using the copy tftp flash command on a router? to back up the current IOS image to a server to restore the IOS image from a server to back up the router configuration to a server to restore the router configuration from flash
The command of the Recovery Console displays or changes the current folder?
Cd
Command of the Recovery Console displays or changes the current folder?
CD
What is the command of the recovery console set the current directory where windows 2000 is installed?
Systemroot
Command of the Recovery Console sets the current directory to the directory where Windows 2000 XP is installed?
Systemroot
What is the purpose of the System root command under the Recovery Console?
You can use the Recovery Console to copy a new set of system files for the Windows setup CD to the hard drivepg 272 CompTIA softwareChanges the current directory to the directory where Windows 2000/XP is installedp 706 CompTIA A+ Guide to Managing & Maintaining Your PC
What is the command to launch the certificate manager console?
certmgr.msc opens for the current user. Not sure about local machine from run/command line.
What is the command to install the Recovery Console on the boot loader menu?
# Insert the Windows XP CD into the CD-ROM drive. # Click Start, and then click Run. # In the Open box, type d:\i386\winnt32.exe /cmdcons where d is the drive letter for the CD-ROM drive. In the case of 'Microsoft Windows XP Professional x64 Edition, type d:\amd64\winnt32.exe /cmdcons where d is the drive letter for the CD-ROM drive. # A Windows Setup Dialog Box appears. The Windows Setup Dialog Box describes the Recovery Console option. To confirm the installation, click Yes. # Restart the computer. The next time that you start your computer, "Microsoft Windows Recovery Console" appears on the startup menu.# Insert XP/2000 CD-ROM. # Open command. # Change the current directory to the \i386 folder on the XP/2000 CD-ROM. # Enter the command winnt32 /cmdcons. # The Recovery Console is installed.
What does the CHMOD command do?
Changes the permissions of a file or folder to grant or deny the ability to read, write, and/or execute the file for the current owner, the current group, or for all users of the system.
What command creates a sub directory under a directory?
Mkdir command creates a subdirectory under a directory (MD creates a directory) . The command Chdir changes the current Default directory(CD changes the current directory). The Rmdir removes the subdirectory(RD removes a directory).
What does close command mean in Excel?
It will close the current workbook. If it has not been saved since the last changes were made, it will ask you if you want to save it.
How do you repair Windows XP using the Recovery Console?
Repair and Recovery of windows Xp with the Recovery Console If Windows won't start, use the DOS-like Recovery Console to make repairs. The Recovery Console is one of the last-ditch tools you can use if your Windows installation doesn't start up at all. Before you resort to the Recovery Console, if Windows starts up, make sure you've already tried System Restore (especially if you've recently changed your hardware). To run System Restore, choose Control Panel Performance and Maintenance System Restore. If it won't start, try running the Windows XP Setup Wizard from the installation CD and choosing its Repair option, or try starting Windows in Safe Mode. If none of these easier paths work, you're stuck using the DOS-like Recovery Console to figure out what's wrong with Windows, your system or boot partition, or your disk's master boot record (MBR). You can use its DOS-like commands to look at the files and folders that make up Windows, and possibly repair them. You can also repair the master boot record and boot sector. You can configure the Recovery Console not to require the administrator password on login. In the Registry Editor, set the value of key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Setup\RecoveryConsole\SecurityLevel to 1. Starting the Recovery Console To start the Recovery Console, boot your computer from the Windows XP installation CD and follow the prompts. When it asks which Windows installation you want, type the number of the installation (1, if Windows XP is the only operating system installed) and press Enter. Type the password for the Administrator account. When the Recovery Console is running, you see the prompt D:\WINDOWS>, which tells you the name of the current folder (directory). If you plan to use the Recovery Console often, add it to your boot menu (the menu that appears if you have a multiboot system). You must be logged in as an administrator. Choose Start Run and type the command d:\i386\winnt32.exe /cmdcons (replace d: with your CD drive's letter if it's not D). The Recovery Console occupies about 7 MB of disk space and stores its program files in \Comdcons on your system drive. Now you can type commands and press Enter, just like in the good old days of DOS! However, not all DOS commands work, and you can't examine files in all folders. You are restricted to the Windows program folder (C:\Windows on most systems), its subfolders, the root folder of the Windows partition (C:\ on most systems), removable drives (including diskette, ZIP, and CD drives-but these are read-only), and the \Cmdcons folder (which contains the Recovery Console program itself, if you have added it to your boot menu). If you know DOS, the Recovery Console's commands look familiar, though only a few are available and some work differently. To see a list of all the available commands, type help and press Enter. To find out how a specific command works, type the command, followed by a space and /? (for example, expand /?). When you are done using the Recovery Console, type exit and press Enter to reboot your computer. Looking Around Use these commands to examine your system: CD folder Changes the current folder to the folder you name. In the folder name, two dots (..) represents the parent folder of the current folder. To move to a different drive, type its drive letter and a colon and press Enter. dir folder or dir filename Lists the contents of the folder, including files and subfolders. For the filename, you can use * as a wildcard character (for example, dir *.dll). You see the last modification date and time, attributes, size (in bytes) and filename. The attributes are represented by letters: d (directory or folder), h (hidden), s (system), e (encrypted), r (read-only), a (changed since last backup), and c (compressed). map Lists the drive letters with their file format (FAT32 or NTFS), size, and pathname. type filename Displays the contents of the file as text. For executable, graphic, and other nontext files, you see garbage. If a filename or pathname includes spaces, enclose it in double quotes. Fixing the MBR, Boot Sector, or Boot Menu If your system can't find a partition from which to boot, try fixing the MBR. Type fixmbr to rewrite the MBR on the boot partition (the drive or partition from which the computer starts up). If the system finds the boot partition but the Windows boot sector is fouled up on the Windows partition (the drive or partition where Windows is installed), rewrite the Windows boot sector by typing fixboot. To specify which drive is the Windows partition, you can add the drive letter (e.g., fixboot c. Windows XP includes a boot menu that allows you to choose which operating system to start up. (It doesn't appear if your system has only one operating system.) To fix the boot menu, use the bootscan command. Type bootcfg /scan to look at all your partitions and drives, scanning for Windows installations. Type bootcfg /list to list the entries in boot.ini (the file that contains your boot menu entries). Fixing Windows If something is wrong with your Windows installation, use these commands to modify or replace the problematic files: attrib filename flag Changes the attribute of a file (filename). The flag is + (adds, or turns on) or - (removes, or turns off), followed by r (read-only), s (system), or h (hidden). chkdsk drive Checks and repairs files and folders on drive. Add the /p switch to check the drive even if no problems are marked. copy sourcepath1 sourcepath2 Copies the file from sourcepath1 and names the new file sourcepath2. The asterisk wildcard (*) doesn't work, so you can copy only one file at a time. diskpart Lets you add or delete partitions, though you can't resize or move them. (For that, you need a program like PartitionMagic; go to http://www.partitionmagic.com.) expand pathname Decompresses files from a .cab file and puts the result in the current folder. If the .cab file contains more than one file, add /f:* to extract all the files. Or add /f:* /d to list all the files in the .cab, and then use expand pathname /f:filename command to extract just the one you want. wildcards in recovery console By default, the Recovery Console doesn't allow you to use wildcards, copy files from local drives to removable media, or use the CD command to list files in subfolders in all folders on all local disks. It also issues a warning message every time you copy files that overwrite existing files. However, if you have the Professional Edition, you can change that behavior using the Group Policy Editor. At a command prompt, type gpedit.msc to run the Group Policy Editor. Go to Local Computer Policy\Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options. In the list of policies on the right, double-click on "Recover console: Allow floppy copy and access to all drives and all folders." Select the Enabled option and click OK. Doing this won't actually make the changes; at this point, you'll have to use the Recovery Console itself to do that. Open the Recovery Console and use the following commands to customize its behavior: set allowwildcards = true This command lets you use the * and ? wildcards with the Recovery Console commands. set allowallpaths = true This command lets you use the CD command to list all files and subfolders on all folders on all local disks. set allowremovablemedia = true This command lets you copy files from local drives to removable media. set nocopyprompt = true This command lets you copy files that overwrite existing files, without getting a warning prompt. For more visit www.thehandycomputerguy.com for your computer repair needs in Pittsburgh
What changes have you introduced into your current role?
What changes have you introduced into your current role?
