0
What else can I help you with?
What connecting device do you use for a small LAN for two or more connected networks?
For a small LAN network, a switch is best. To connect two or more LAN networks, a router is required. (2) From Jean Andrews CompTIA A+ sixth edition (page #852): You can use a crossover cable to connect to computers without a switch or hub making it the simplest network of all. For two or more you will need a switch, hub, or router.
What is the purpose of a wireless LAN adaptor?
A WIFI adapter is a deviced used by computers or laptops which do not have a built-in wireless card. A WIFI adapter, once plugged into a computer or laptop, allows the the device to use nearby wireless signals. Belkin is a popular brand which manufactures WIFI adapters.
Why does the download time keep increasing on my mac?
Either you have a bad connection or your save device is messed up. It might just be your connection. If you have a small amount of free space on a device, then that might slow down the download. it may also be the way they do downloads some use seed peer where you need other computers to keep your download going faster
How do you enable a LAN connection between two DHCP routers?
One of the routers you have to connect to internet, another one you have to connect to the first one using a lan cable. You can use any of lan ports of the first router to connect the second one (except internet port, usually it's marked as WAN or similar to). The lan cable should be connected to the WAN port on the second one. Only in such case it works properly.
Which type of network spans a single building or campus and provides services?
Small,closed Networks are usually some kind of (W)LAN ((Wireless) Local Area Network) which use Routers and Ethernet-Switches to provide the communication channels for network based software, since the LAN itself is just the infrastructure. Larger networks may be split into logical units using VLAN (Virtual Local Area Network). Clients outside the LAN can for example use Browsers (web) or VPN to connect to the machines inside the network.
What connecting device do you use for small LAN?
Switch for small LAN, Router for two or more
Is it possible to create a LAN connection with a PC to laptop and how?
A LAN connection usually goes through a network connectivity device, such as a hub or switch or a router. If you want to go directly from a PC desktop to a laptop use a cross-over cable to connect the two devices and configure the network settings appropriately.
Can the 27 inch iMac use LAN connection?
Yes, with no problem.
Define how to be configure 100 PC at internate?
Answer: purchase high speed internet connection brodband. use two lan card on this PC. and one lan card connect directly internet connection wire. and another lan card wire connect in swith and share internet connection and then use.
A corporate lan must use which device to gain access to the internet?
gateway
7 What connecting device do you use for a small LAN?
It's called a switch. Many wireless routers have a 4-port switch. Also you can purchase a switch separately.
Can you use ipod touch with a LAN connection?
unless that lan is connected to a router that is connected to a modem that can access internet... it would make no sense
State and compare internetworking device used to connect different LAN segments?
An Internet working device used to connect different LAN segments is called a Modem. A Modem can be either hard wired to the computer or use a Wi-Fi connection to connect to the computer. Dial up Modems were also used that ran through telephone lines.
What type of connection media can be used for a lan?
cheap and simple connection use utp if noise or interference have to consider then co-axial
What are the uses for a Screened Unshielded Twisted Pair cable?
People use such cables for LAN connection
What type of network is most suitable for use in small office?
LAN
What connecting device do you use for a small LAN for two or more connected networks?
For a small LAN network, a switch is best. To connect two or more LAN networks, a router is required. (2) From Jean Andrews CompTIA A+ sixth edition (page #852): You can use a crossover cable to connect to computers without a switch or hub making it the simplest network of all. For two or more you will need a switch, hub, or router.
