bus width
The transmission time formula is calculated by dividing the size of the data packet by the transmission rate of the communication system. This formula helps determine the time it takes for data to be sent from one point to another.
Packet Switching
HUB
The average case time complexity of an algorithm is the amount of time it takes to run on average, based on the input data. It is a measure of how efficient the algorithm is in terms of time.
The amount of data and program instructions that can be swapped at a given time is determined by the size of the computer's virtual memory. Virtual memory allows the computer to temporarily store data and program instructions that are not currently in use in the RAM. The size of virtual memory is typically limited by the operating system and hardware constraints, such as the amount of physical RAM installed in the computer.
Yes, bandwidth refers to the maximum amount of data that can be transmitted over a communications channel in a specific time frame, typically measured in bits per second (bps). It determines the speed and capacity of data transfer, affecting how quickly information can be sent or received. Higher bandwidth allows for more data to be transmitted simultaneously, enhancing the performance of internet connections and network services.
False. The amount of data that can be transferred over a bus in a given time period is determined by the bus bandwidth, not by its volatility. Volatility refers to how quickly data stored in a system is lost when the power is turned off.
Yes, capacity refers to the maximum amount of data that can be transmitted by a medium within a specific time frame, usually measured in bits per second (bps) or bytes per second. It determines how much information can be communicated effectively over the medium.
The amount of data sent and received over a broadband connection is called "bandwidth." Bandwidth typically measures the maximum rate of data transfer, indicating how much information can be transmitted in a given time period, usually expressed in bits per second (bps). It is a key factor in determining the speed and quality of internet connections.
The number of bits of data that can be sent along a bus at any one time is determined by the bus width. Bus width refers to the number of parallel lines or channels available for data transmission, typically measured in bits (e.g., 8, 16, 32, or 64 bits). A wider bus can transmit more bits simultaneously, allowing for greater data throughput and improved performance in computing systems.
Data collision occurs when the sent data from a physical network unable to reach its destination due to some reason. It normally happens when two or more devices attempt to send a signal along the same transmission channel at the same time.
A ) Receipts are sent monthly. B) Credit reports are sent monthly. C) Statements of the amount due are sent monthly. D) Sales figures are sent monthly. Should be C) Statements of the amount due are sent monthly.
The transmission time formula is calculated by dividing the size of the data packet by the transmission rate of the communication system. This formula helps determine the time it takes for data to be sent from one point to another.
Computer network Polling is where a client server or Network Hub polls each computer for data. Data can only be sent when the particular computer is polled. If the computer has data to send but is not polled at that time, the data has to be stored until it can be sent. ^_^ JunkCollector ^_^
The amplitude of a transverse wave determines the amount of energy at one time. A higher amplitude corresponds to a greater amount of energy being carried by the wave.
Data transfer rate is the speed at which data is transmitted between devices, usually measured in bits per second (bps) or bytes per second (Bps). It indicates how quickly data can be sent from one location to another over a network or communication channel. A higher data transfer rate means faster data transmission.
Short-term memory.