Open main valve for 1 minute while capturing water (think bucket), then measure water.
tape measure?
It kills most of all the germs and bacteria/pathegons in it. Some germs can tolerate extreme heat, but the vast majority die. However, boiling does not get rid of lead, dirt, calcium chloride, calcium floride, copper, ect. However, boiling water temporarily decreases the hardness of the water; therefore, afterwords it can be more hard. If you are looking to boil water, you should have a pre-filter and you should also have a second purification method, because boiling isn't the most effective measure of purification.
Because an angle is a degree. It would be pretty silly to measure them in, say, horsepower, no?
Use a voltmeter.
Shear vane is a tool used to measure the shear strength of soil.
A wind vane measures direction of the wind. Millibars are a measure of pressure. A barometer measures in millibars.
No a wind vane measures or indicates wind direction.
An Anemometer measures the wind speed and the Wind Vane measures the direction of the wind.
No, just direction.
A wind vane measure wind direction. It doesn't measure wind speed, it tells which direction the wind is coming from and which direction it is currently blowing.
An anemometer with a wind vane is the right answer
No, it measures the direction in which its travelling.no it tells you where the wind is coming fromNo. The wind vane would give you wind direction not wind speed.false
Weather vane or wind vane does not measure anything, it just shows the direction the wind is out of, a wind monitor measures the force the wind is blowing, in mph or kph.
No. The force of gravity is measured in scales.
No, it measures speed and direction of wind.
so we can measure what direction the wind is going!