answersLogoWhite

0

While the metal strength and durability of steel caskets is measured in gauge (ga.) - indicating the thickness of the metal - the strength of copper and bronze caskets is usually measured by the weight of the wrought metal sheets from which the caskets are welded together. The sheets used in standard solid copper or bronze caskets have a weight of 32 ounces per square foot, while more expensive caskets use 48oz sheets. Most 32 oz caskets have an empty weight between 200 and 300 lbs, most 48oz caskets between 250 and 350 lbs. In rare cases, 64 oz copper sheets or 96 oz bronze sheets are used for luxury caskets.

Exceptions confirm the rule: the measurement in ounces per square foot is not used for top of the line copper and bronze caskets: copper deposit caskets (not welded from copper sheets, but made by a time consuming electrolytic process) usually have a wall thickness of 1/8" (3mm) and an empty weight of approximately 600 to 800 lbs, while cast bronze caskets (which are cast from molten bronze like bells) usually have a weight between 1,000 and 1,200 lbs, which equals that of solid bronze caskets made from sheets with a weight of at least 96 oz.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Computer Science

What is a bronze or copper inner casket liner with full oval glass lid?

A casket liner is a coffin inside a burial casket. While zinc or steel liners are used for international shipments of remains, copper or bronze liners are primarily used in wooden luxury caskets to give them a protective quality against the elements, especially against ground water. Unfortunately, the terminology varies: sometimes the expression "inner liner" is reserved to a liner not possessing a sealing gasket while a hermetically sealing (air and water tight) liner sometimes is called "inner sealer". It seems that such liners are no longer manufactured in the US. The liners were usually made of standard 32oz copper or bronze sheets. The (empty) weight of 32oz bronze liners with glass lid was between 200 and 250 lbs. Their wholesale price was approximately half the price of a standard bronze or copper casket. The lid was either of metal or of plate glass. If the glass lid had almost the length of the casket, it was called a full lid. Usually the glass lid was not flat but oval, possessing a slight dome shape. In rare cases, the glass lid was covered by an additional protective metal lid which usually was divided into two halves (a head end panel and a foot end panel). Many wooden caskets could be retrofitted with inner casket liners. Thus the same casket could be purchased with or without an inner liner. The funeral director just had to remove the textile lining from the wooden casket, place the metallic liner into the casket and reattach the textile lining to the inside of the casket liner. Wooden caskets designed for being equipped with an inner liner possessing a glass lid usually have a "hinged cap" lid, which means that not the complete - full or half - top opens up for viewing, but only the "cap" or "crown", while the "ogee" or frame of the lid remains attached to the base of the casket. The rather small opening of the wooden top in hinged cap caskets has the effect that just the glass lid is visible and not the metal liner. Casket liners must not be confused with grave liners (non protective burial vaults) or with metal or plastic liners inside of a concrete burial vault.


How is copper used today?

Used for wiring, for decoration, some coinage, and for very long term building materials (roofing, gutters, etc). Some use in jewelry, and making of brass and bronze (and other alloys)


How do you store copper?

Copper can be stored in bottles containing water, such that none of the copper is exposed to air, as this can cause the corrosion of copper.


Is there copper in computers?

Yes. Almost all metal parts of a computer's motherboard and circuitry contain copper.


Which material has the highest Cp value?

copper

Related Questions

How much does a metal burial casket weigh?

Standard metal caskets (20ga steel) weigh around 200 lbs empty. Most solid (sheet) copper or bronze caskets have a weight between 250 and 350 lbs. Copper deposit caskets (made of electrolytically deposited copper) between 600 and 800 lbs. Cast bronze caskets (cast from molten bronze like bells) between 1,000 and 1,200 lbs.


What is the difference in price between a copper deposit casket and a bronze cast casket?

The question is somewhat difficult to answer because copper deposited casket were manufactured until the 1980s only. Cast bronze and copper deposited caskets are the most expensive and the most heavy metal caskets available. While cast bronze caskets weigh between 1,000 and 1,200 lbs, copper deposit caskets have a weight between 600 and 800 lbs. The price difference between these caskets (which were manufactured by the Boyertown Burial Casket Company and by the National Casket Company of Boston) in the 1970s was as follows: cast bronze casket had a wholesale price between US $ 15,000 and 19,000 while copper deposited caskets cost between $ 5,000 and 6,000 wholesale (plus approximately $ 1,000 for an optional silver plated exterior).


How heavy are luxury casket made from copper or bronze?

Standard copper and bronze caskets - made of 32 oz sheets of wrought metal (one square foot of a copper or bronze sheet weighing 32 ounces) have an (empty) weight starting around 200 lbs. More expensive copper and bronze caskets made of 48 oz (and in rare cases of 64 oz or 96 oz) sheets as well as caskets having a double lid usually weigh between 300 and 400 lbs. Copper deposit caskets (caskets made by electrolytically depositing copper molecules upon a casket form usually made of sheet copper) have a weight between 600 and 800 lbs. Cast bronze caskets (made from molten bronze poured into a casket mold) weigh between 1,000 and 1,200 lbs.


Is a bronze casket more or less expensive than a copper casket?

Bronze caskets may be somewhat more expensive than copper caskets, but the price difference matters only in the lower price bracket of caskets made of semi precious metals; in the higher price brackets it seems to become irrelevant.


What companies manufacture or manufactured copper deposit caskets?

Currently, copper deposit caskets are no longer produced in the US. Copper deposit caskets are caskets which - unlike solid copper caskets which are welded from sheets of wrought copper - are made in a time electrolytic process in which copper molecules are deposited upon a casket form which usually is made of 48 oz copper sheets. While sheet copper caskets weigh between 200 and 300 lbs and are available from $ 2,000 upwards (Online casket retailers' price), copper deposit caskets weigh between 600 and 800 lbs (the typical thickness of the casket walls is 1/8 inch respectively 3mm) and cost up to a dozen times more than standard 32 oz sheet copper caskets. Only cast bronze caskets are more heavy (between 1,000 and 1,200 lbs) and around three times more expensive (currently between $ 160,000 and 270,000). Until the 1980s, copper deposit caskets were manufactured by the Boyertown Burial Casket Company and by the National Casket Company of Massachusetts. The famous National Seamless Copper Deposit caskets had no joints or welding seams nor did the attachments of the handles penetrate the casket walls. The caskets were offered in several designs including a heavily rounded corner design and an urn shaped one. A National Seamless Copper Deposit Casket was used, for example, for the burial of President Franklin D. Roosevelt (a bronze plated round corner model # 21260), for the newspaper magnate William Randolph Hearst (a triple lid round corner design), for Elvis Presley (a round corner model # 21200) for the religious leader Eliajah Muhammad (a silver plated round corner double lid model #21200) and for the burial of singer Aaliyah Haughton (a silver plated model # 20761 with lavish ornamental corners). Boyertown also manufactured several designs. One of their deposit caskets (the model # 2471) was a double walled copper deposited 48 oz bronze unit, featuring an outer copper deposited 48oz bronze casket and another inner solid bronze casket; this luxury model had a hermetically sealed triple lid: the outer one was made of deposited copper and undivided, the middle one had divided panels made from bronze and the innermost lid was an undivided full length oval plate glass panel. The brass bar handles were attached in such a way that they did not penetrate the wall of the outer casket. The casket was available with either a statuary bronze finish or with silver plated exterior. Probably the closest modern equivalent to a copper deposit casket is the "Marquis" model of the York-Matthews Company, a thermo-deposit 48oz bronze casket, weighing around 310 lbs and offered at prices between $ 25,000 and 38,000.


What are the different types of metal caskets?

Metal caskets are available in carbon steel, copper, bronze, and stainless steel. Carbon steel caskets are available in different gauges, ranging from 20 gauge (the thinnest) to 16 gauge (the thickest)


What is a copper deposit casket and what is a solid copper casket?

Copper deposit caskets are often described as "copper lined caskets" - a description which is misleading because it misses the big differences in production methods, weight and price of solid (sheet) copper caskets versus copper deposit caskets. Solid copper caskets are welded (or soldered) from sheets of wrought copper, while copper deposit caskets are made in a time consuming electrolytic process by which molecules of copper are deposit upon a casket form which usually consists of 48 oz (ounces per square foot) copper or bronze sheets. This provides the casket with extra strength and a very smooth and untarnished surface without welding seams or burns. Copper deposit caskets usually have a wall thickness of 1/8" (3mm - about twice as thick as 48oz copper sheets) resulting in an empty weight of approximately 600 to 800 lbs, while most solid copper caskets weigh between 200 and 300 lbs. In terms of prices, the difference is even bigger, although it is difficult to talk in current prices because copper deposit caskets were manufactured in the US until the end of the 1970s only.


Why are copper caskets only offered in 32oz copper and not 48oz copper?

There have been also a few 64 oz copper caskets around (for example one by the former Chicago Casket Company). In addition to that, there were the copper deposit caskets in production until the end of the 1970s by the National Casket Company of Boston and by the Boyertown Burial Casket Company. These caskets can be compared to 96 oz sheet copper caskets. While solid copper caskets are welded (or soldered) from sheets of wrought copper, copper deposit caskets are made in a time consuming electrolytic process by which molecules of copper are deposit upon a casket form which usually consists of 48 oz (ounces per square foot) copper or bronze sheets. This provides the casket with extra strength and a very smooth and untarnished surface without welding seams or burns. Copper deposit caskets ususally have a wall thickness of 1/8" (3mm - about twice as thick as 48oz copper sheets) resulting in an empty weight of approximately 600 to 800 lbs, while solid copper caskets weigh between 200 and 300 lbs. The main reason for (currently) producing 32oz and 48oz copper caskets only is probably the more affordable price. At the end of the 1970s, the wholesale price of a copper deposit casket was between $ 5,000 and 6,000 (plus about 1,000 for an optional silver plated exterior), while 32 oz solid copper caskets were available from around $ 500 wholesale already. Thus, the price of a copper deposit casket was about a dozen times that of the lowest priced solid copper sheet casket.


What kind of casket was Elvis Presley buried in?

Elvis Presley was buried in a seamless copper deposit casket, design # 21200, manufactured by the (former) National Casket Company of Boston. Twenty years befor, Elvis's mother had been buried in the same type of casket (which at the time of her death retailed at $ 8,000). Copper deposit caskets are often described as "copper lined caskets" - a description which is misleading because it misses the big differences in production methods, weight and price of solid copper caskets versus copper deposit caskets. Solid copper caskets are welded (or soldered) from sheets of wrought copper, while copper deposit caskets are made in a time consuming electrolytic process by which molecules of copper are deposited upon a casket form. This provides the casket with extra strength and a very smooth and untarnished surface without welding seams or burns. Copper deposit caskets ususally have a wall thickness of 1/8" (3mm - about twice as thick as 48oz copper sheets) resulting in an empty weight between 600 to 800 lbs, while solid copper caskets weigh between 200 and 300 lbs. Pricewise, the difference is even bigger, although it is difficult to talk in current prices because copper deposit caskets were manufactured in the US until the end of the 1970s only. At that time, the wholesale price of a copper deposit casket was between $ 5,000 and 6,000 (plus about 1,000 for an optional silver plated exterior), while 32 oz solid copper caskets were available from around $ 500 wholesale already. Thus, the price of a copper deposit casket was about a dozen times that of the lowest priced solid copper sheet casket. The high price (as well as the enormous weight) of copper deposit caskets was exceeded only by that of cast bronze caskets (coffins which are cast from molten bronze like bells; they cost three times as much as copper deposit caskets and have a weight between 1,000 and 1,200 lbs). Copper deposit caskets were manufactured by two companies which are no longer in business, although they once were giants of the industry: the National casket company of Boston and the Boyertown Burial Casket Company. Both firms produced several copper deposit designs (and cast bronze caskets as well).The famous National seamless copper deposit caskets had no joints or welding seams nor did the attachments of the handles penetrate the casket walls. National copper deposit caskets (of different designs) were used for the funerals of many famous persons and celebrities other than just Elvis Presley, as for example of President Franklin D. Roosevelt, newspaper magnate William Randolph Hearst, and singer Aaliyah Haughton.


Is there a difference in material and price between a solid copper casket and a copper deposit casket?

Yes, there is a difference, and it's a big one. Solid copper caskets are made from sheets of wrought copper which usually have a weight of 32 ounces per square foot (standard caskets) or 48 oz, in rare cases even 64 oz or more. The typical weight of a sheet copper casket is between 200 and 300 lbs. 32 oz solid copper caskets are available from $ 2,000 upwards (Online casket retailers). Copper deposit caskets are produced in a time consuming process in which molecules of copper are deposited upon a casket form (usually made of 48oz copper sheets). Copper deposit caskets weigh between 600 and 800 lbs because the typical thickness of their walls is about 1/8 of an inch (3 mm). The cost of copper deposit casket is so high that they were manufactured until the 1980s only (by the Boyertown Burial Casket Co. and by the National Casket Company of Boston). At that time, a copper deposit casket was about a dozen times more expensive than a standard 32oz solid copper casket. The optional silver plating of the exterior would add another 25% to the cost of the casket. This price was exceeded only by cast bronze caskets (weighing between 1,000 and 1,200 lbs), which in the 1970s were about three times more expensive than copper deposit caskets. As mentioned, copper deposit caskets are no longer in production. The closest modern equivalent probably would be the 300 lbs heavy 48oz thermo-deposited bronze casket called "Marquis", manufactured by the York-Hoover Company; the casket costs about ten times the price of a standard 32 oz bronze coffin. The most famous copper deposit caskets were made by the National Casket Company. These copper deposit caskets had no joints or welding seams nor did the attachments of the handles penetrate the casket walls. National seamless copper deposit casket were used for the funerals of President Franklin D. Roosevelt (# 21260 bronze plated), William Randolph Hearst (# 21200 as triple lid inner glass sealer), Elijah Muhammad (silver plated model # 21200 as glassless double lid sealer) Elvis Presley (# 21200) and Aaliyah Haughton (# 20761 ornamental corner design, silver plated). The Boyertown Burial Casket Company manufactured several copper deposit designs, for example a copper deposited bronze casket (model # 2471) which had a complete solid bronze inner casket inside of it. The casket had a triple lid (outer and middle metal lids and an inner glass lid); the weight was probably around 700 lbs.


What is coffine?

Most metal caskets are made of steel, either carbon steel or stainless steel. But zinc, aluminum, copper, and bronze are also used for making metal coffins.


What is coffin metals?

Most metal caskets are made of steel, either carbon steel or stainless steel. But zinc, aluminum, copper, and bronze are also used for making metal coffins.