0
What ipconfig command requests IP configuration from a DHCP server?
Wiki User
∙ 14y ago
ipconfig /renew
if you're on windows
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Find Primary wins server?
To find the IP address of the primary WINS server, open up the 'cmd' command line prompt. Type /ipconfig into the command line and hit enter.
What is the IP address of the DHCP server?
DHCP server must be assigned a static IP address...On a Windows computer you can find out the IP address of the DHCP server that assigned your current IP address by opening a command prompt and typing "ipconfig /all".
What is the purpose of using the copy tftp flash command on a router?
What is the purpose of using the copy tftp flash command on a router? to back up the current IOS image to a server to restore the IOS image from a server to back up the router configuration to a server to restore the router configuration from flash
What is the functions of server?
Dynamic Host Configuration Protocol(DHCP) Server is used to distribute IP in the network automatically from the range specified in the DHCP Server while creating scope. -- By MyNarutoAnime ----
How does a networked server manage requests from multiple clients for different services?
The applications installed help the networked server manage requests from multiple clients for different services. The server receives the requests and delegates them.
Purpose of the ipconfig release command?
What is the purpose of the ipconfig /release command? The ipconfig /release command forces a client to give up its current IP address. The IP Release command releases the "hold" of any IP address configuration data it has received from the DHCP server and allows that IP Address to be re-assigned to another network adapter. After issuing a release command, your network adapter will no longer have a valid configuration and will not be able to connect to the network unless you use the command ipconfig /renew or you restart the adapter/computer.
Which command is used to find the DNS server?
Open a command prompt window then type in ipconfig/all Then there should be your dns server.
What command should you enter to view the host name and dns server address?
ipconfig / all
Which command would you use as a test to see if a DNS server will respond to a request to resolve a name?
ipconfig
Find Primary wins server?
To find the IP address of the primary WINS server, open up the 'cmd' command line prompt. Type /ipconfig into the command line and hit enter.
How do you find your dhcp server id?
You haven't indicated what operating system you are using. For windows, using the 'ipconfig /all' command will show you what the DHCP server address is.
What is accomplished by the command copy tftp running-config?
This command will allow you to copy a configuration from a TFTP server to the running configuration of a Cisco device. When you issue the command you will be prompted for further details about the TFTP server. The new configuration will replace the active one (or running configuration) and make any necessary changes.
What is the effect of command copy running config tftp?
This command will copy the running configuration (located in RAM) of a Cisco device to a TFTP server. After executing the command you will be prompted for further information about the TFTP server (Server Address, file name, etc.).
What occurs when computers are configured to receive their network configurations dynamically?
Each computer requests configuration information from a server.
What is ipconfig release?
An ipconfig release is a command issued in Microsoft Windows to release the current IP address acquired through the DHCP server. This will reset the connection, but typically results in the same address being received again.
How do you use ipconfig in windows 2000?
type "ipconfig" from a command prompt. (Start > Run > CMD) The basic command will display the essential IP address info for each network adapter: IP Address, Subnet, and Gateway There are several helpful switches. The most common: /all--displays complete IP configuration, such as DHCP servers, WINS Servers, DNS Servers /release--releases the lease on an IP Address assigned by DHCP /renew--requests an IP Address from the DHCP Server /?--returns a complete list of switches and syntax for this command
What command would you use to list the TCP IP configuration for all of the NICs in your Linux server?
ifconfig
