0
What else can I help you with?
What is 60 in hexadecimal?
60 in hexadecimal would be 3C
What times 8 equals 60?
7.5 x 8 = 60
How many seconds are there in 1 hour 4 minutes 6 seconds?
There are 60 seconds in one minute. There are 60 minutes in one hour. Therefore, 1 hour 4 minutes 6 seconds is equal to (1 x 60 x 60) + (4 x 60) + 6 = 3846 seconds.
Is 10 NS of RAM faster than 60 NS if RAM?
10 ns RAM is faster than 60 ns RAM.
How many seconds are there in 5 minutes?
There are 60 seconds in one minute. Therefore, 5 minutes is equal to 5 x 60 = 300 seconds.
Which sandpaper grit size is the most coarse?
The most coarse sandpaper grit size typically starts at around 40 or 60 grit. These lower grit sizes are used for heavy material removal on rough surfaces.
How is sandpaper measured?
By the amount and size of grit on the paper. The smaller the number, the less the grit of larger size. the bigger the number, the more the grit of smaller size. 60 grit would be for removing a lot of material, 320 grit would be for finer sanding.
What is the recommended grit size for the coarsest sandpaper to use when sanding rough surfaces?
The recommended grit size for the coarsest sandpaper to use when sanding rough surfaces is typically around 60 to 80 grit.
What is the difference between 60 and 80 grit sandpaper?
The primary difference between 60 and 80 grit sandpaper lies in the coarseness of the abrasive particles; 60 grit is coarser and removes material more quickly, making it suitable for heavy sanding and shaping. In contrast, 80 grit is finer and provides a smoother finish, ideal for intermediate sanding or preparing surfaces for finishing. The choice between the two depends on the specific project and the desired surface smoothness.
What is the recommended sandpaper grit for deck refinishing?
The recommended sandpaper grit for deck refinishing is typically between 60 and 80 grit for initial sanding to remove old finish and smooth the surface, followed by 100 to 120 grit for a finer finish before staining or sealing.
What is the coarse sandpaper?
Coarse sandpaper has lower grit numbers, typically ranging from 40 to 60 grit. It is used for heavy material removal and rough sanding tasks where a smooth finish is not required.
What grit sandpaper should be used for refinishing wood floors?
For refinishing wood floors, it is recommended to start with a coarse grit sandpaper, such as 36 or 40 grit, to remove old finish and level the surface. Gradually move to finer grits, such as 60, 80, and 100, for a smoother finish. Finish with a very fine grit, like 120 or 150, for a polished look.
What grit sandpaper should be used for refinishing hardwood floors?
For refinishing hardwood floors, it is recommended to start with a coarse grit sandpaper, such as 36 or 40 grit, to remove the old finish and level the surface. Then, progress to finer grits like 60, 80, and 100 for smoothing and finishing the wood.
Dffrence between 180 grit sandpaper and 60 grit sandpaper?
The higher the number code printed on the back of all sandpaper the finer the grit. With a little practice you can begin to understand what grit is appropriate for any given job. For instance, I refinish hardwood floors and it requires three courses of sanding. To help quickly remove an old finish from hardwood floors I start with a very course #20 sandpaper. It is so rough that it removes a large amount of material pretty quickly. Then, when I have sanded the floor down to bare wood I "step up" to 60 grit sandpaper. Once I've gone over the entire floor with the 60 grit I "step up" again to the finer 100 grit paper. When refinishing wood floors or furniture it is necessary to use several courses of sanding to help remove the deep scratches created by the rougher grits of sandpaper. I hope this helps. John
Where do you get grit?
you get grit from Sweden
Where would you find the terms 80 grit 100 grit and 120 grit?
terms used mostly on sand paper, emery cloth, or other fine abrasive materialYou should always know the type of wood you are finishing before starting any sanding. The type of wood you are sanding has a direct relationship to the grit used for final sanding. There are two basic types of wood - softwoods and hardwoods.Typical softwoods are Pine and Fir. Softwoods can be finish sanded with 150 or 180 grit prior to the application of primer. Please see Grit Guide for more information:Grit GuideVery Fine (220) For light sanding between stain and sealer. Fine (150-180) For final sanding or cleaning of wood surfaces. Medium (100-120) For moderate removal of surface imperfections. Course (60-80) For heavy removal of wood and coatings. * http://www.nortonconsumer.com/Data/Element/Node/Application/Application_edit.asp?ele_ch_id=A0000000000000001555"What are the grit sizes equivalent to?" United Kingdom:-UF Ultra Fine:- approximately equivalent 420 Grit sandpaper.F Fine:- approximately equivalent 320 Grit sandpaper.M Medium:- approximately equivalent 220 Grit sandpaper.C Coarse:- approximately equivalent 180 Grit sandpaper.XC Extra Coarse:- approximately equivalent 120 Grit sandpaper.XXC Extra, Extra Coarse:- approximately equivalent 80 Grit sandpaper USA:-UF Ultra Fine:- approximately equivalent 140 Grit sandpaper.F Fine:- approximately equivalent 120 Grit sandpaper.M Medium:- approximately equivalent 100 Grit sandpaper.C Coarse:- approximately equivalent 60 Grit sandpaper.XC Extra Coarse:- approximately equivalent 46 Grit sandpaper.XXC Extra, Extra Coarse:- approximately equivalent 24 Grit sandpaper * http://www.permagrit.com/faq.php
What happens in a grit chamber?
in a grit chamber mixing of grit takes place.after grit mixing only organic matter remains
